No Specification parameter Detail 1 Product name high quality M type electric finned flange heat...
    Supply U Bending, J Bending and U-J Bending as per customers drawings and specifications. This unique U-J Mandrel Bent Tubing combines a **0 degree bend and a *5 degree bend into one integral ...
    Handling Torch Furnace silicon caibide heating elements have high compressive strength. They are relatively low in tensile...

Membre gratuit

Points de confiance : 0

    Handling Torch Furnace silicon caibide heating elements have high compressive strength. They are relatively low in tensile...

Membre gratuit

Points de confiance : 0

    Handling Torch Furnace silicon caibide heating elements have high compressive strength. They are relatively low in tensile...

Membre gratuit

Points de confiance : 0

    Handling Torch Furnace silicon caibide heating elements have high compressive strength. They are relatively low in tensile...

Membre gratuit

Points de confiance : 0

    Handling Torch Furnace silicon caibide heating elements have high compressive strength. They are relatively low in tensile...

Membre gratuit

Points de confiance : 0

    Electrical heating pipe is adding the heating element in the metal pipe, then closely blocking the gap of heating element with magnesium oxide crystal which is good heat resistance, good thermal co...
    Its heating material is tubular electrical heating element bending, through mould, it is centrifugal casted to all kinds of shapes, as round form, plate form, right angle form, air cooled form, wat...
    It is used for heating in high temperature. The surface loading can reach **8W/cm2. It is good thermal cond...
    It is used in high temperature. The surface load can reach **9W/cm2. It is good thermal conductance, good i...
    Specification: Sheath Material Cr Ni-Steel, hose, Insulation Material MgO Resistance Wire Ni Cr ****0 Maximum Sheath Temperature **0 C Die Electrical Strength **0V A/C Insula...

Membre gratuit

Points de confiance : 0

    Ceramic band heater: for hot runner bushings are made of helically wound nickel chrome resistance coil precisely stretched and strung through steatite ceramic cores forming a flexible heating ...

Membre gratuit

Points de confiance : 0

    During casting process, the temperature control is an important factor for obtaining a good castings. In order to control the optimum melt pouring temperature, the heat generator is used to assure ...
    Al Continuous caster using launder Ceramic launder, refractory material, launder, heat-resistance transfer channel, Launder is a channel, normally internally lined, used for the transfer ...
    1. standard Liugong part 2. cheaper than Liugong sometimes 3. faster delivery, no queue 4. responsible from start to finish
    1. standard Liugong part 2. cheaper than Liugong sometimes 3. faster delivery, no queue 4. responsible from start to finish
    Torch furnace mosi2 heater can be widely used in such applications as sintering and heat treatment on electronic ceramics, structural ceramics, magnetic materials, flameproof materials, glass, ...

Membre gratuit

Points de confiance : 0

    Torch furnace mosi2 heater can be widely used in such applications as sintering and heat treatment on electronic ceramics, structural ceramics, magnetic materials, flameproof materials, glass, ...

Membre gratuit

Points de confiance : 0

    Its heating material is tubular electric heating element bending, through mould, it is casted to all kinds of shapes, as round form, plate form, right angle form, air cooled form, water cooled from...
    Compressing spring fixed chromel constantan thermocouple is hugging the end of thermocouple with the surface of passive detection parts closely to improve reliability and accuracy of measure, used ...
    For hot runner system and nozzle heating system of split gate type and single gate type. We will provide you the best service according to your requirement . At the same time, you can also provide...
    Standard sizes: 3/6, 4/9, 6/*2, 9/*8 and *2/*4 long life and consistent performance. Available special designed MoSi2 elements

Membre gratuit

Points de confiance : 0

    Standard sizes: 3/6, 4/9, 6/*2, 9/*8 and *2/*4 long life and consistent performance. Available special designed MoSi2 elements

Membre gratuit

Points de confiance : 0

    Specification 1 Material: aluminum 2 Fin Type: perforated-fin, wavy-fin, serrated-fin, plate-fin and louvered-fin 3 Main fe...

Membre gratuit

Points de confiance : 0

< Préc.  1  2  3  4  5  6  7  8  9  Suiv. >
Contact Us
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services