Prix FOB
Obtenir le dernier prix|
100 Set Minimum Order
Pays:
China
N ° de modèle:
YMA20-63A
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
100 Set
Packaging Detail:
-
Heure de livraison:
20DAYS
Capacité de Fournir:
10000 Set per Day
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter hanjiang
Shaoxing, Zhejiang
YMG-series temperature pipe welding machines are suitable in welding various plastic pipes like PPR pipes, PE pipes, PB pipes, PE-RT pipes, PB pipes,etc,these kind of micro digital welding machines are equipped the digital temperature of industrial class, with the excellent features of controlling the temperature precisely and flexibly. The handle is made of engineering rubber, it has the good insurability, and can resist the high temperature. In addition, all the moulds are covered with American famous coatings Teflon, to protect the plastic pipes from adhering, these micro digital welding machines can ensure the plastic pipes against leakage and break, they are all necessary pipeline tools, the concerned products of this kind are as follows
Technology parameter
1)temperature rang:****0degree
2)voltage rang:**0±*5v
3)power:**0w  *0HZ
4)specification:*0mm *5mm *2mm *0mm *0mm *3mm
5)welding material: PPR PE PB
6)Working temperature(°C):******0,best temperature is **0
7)Working range:****3(mm)
8)Foot: A special foot  with clamp that enables working at any location
9)Safety indicators: the insulation resistance of not less than 1M
*0) Leakage current: ≤ 5mA (AC RMS).
ÂÂ
USING
1.  Apply die head
Place the welding machine on the stander, chose die head according to pipe’s diameter, and fix it on the machine. In regular, the small end is at the front, the bigger end at the back.
2.  Power onÂÂ
 Power on (make sure the power should be with leakage current protector) , the green light and the red light on, wait till the red light off and keep greenlight on, which indicates the machine enter into auto temperature control mode and the machine can be used.
Note: during the auto temperature control mode, the red and the green light will be on and off alternatively, this indicates that the machine is under control and it will not affect operating.
3.  Fusion pipesÂÂ
Using cutter to cut pipe vertically, push the pipe and fitting into die head without any rotation. Take them off immediately when heating time reached (see the table below) and insertÂÂ
OD(mm) |
Depth(mm) |
Heating time (s) |
Cooling time (s) |
*0 |
*4 |
5 |
3 |
*5 |
*6 |
7 |
3 |
*2 |
*8.1 |
8 |
4 |
*0 |
*0.5 |
*2 |
4 |
*0 |
*3.5 |
*8 |
6 |
*3 |
*7.4 |
*4 |
6 |
Pays: | China |
N ° de modèle: | YMA20-63A |
Prix FOB: | Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | 100 Set |
Packaging Detail: | - |
Heure de livraison: | 20DAYS |
Capacité de Fournir: | 10000 Set per Day |
Payment Type: | T/T |
Groupe de produits : | - |