La description
Wooden Grooved Acoustic
panels
It is based on acoustic theories, and manufactured by advanced
equipment and technology. Thanks to the ingenious design and all
kinds of decorative surfaces, this kind of acoustic panel is not
only easy to install, but also visually attractive.
Yiacoustic in wooden grooved acoustic panel is made up of a
series of longitudinal slats and grooves. Each panel has a machined
tongue sown one long edge and a machined groove down the other long
edge . Each end is square edged.
Four standard pattern of Yiacoustic grooved acoustic panel are
named: ***3, ***2, ***4, ***5, which are recognized by the width of
the slats and groove.Â
For example, pattern ***3 has slots machined at every *6mm
resulting in each slat being *3mm width and each groove being 3mm
width.
Â
Â
Specifications
__________________________________________________________________________________
Â
1. Structure: Base Material, Finish&Balanced Finish
2. Basic Material: E1 MDF, FR MDF, MgO Combination Board,
etc.
3. Finish: Melamine, Natural Wood Veneer, Paint, etc
4. Balanced Finish: Black Fleece
5. Standard Size: ***0***2mm, ***0***8mm
6. Standard Thickness: *2/*5/*8mm
7. Standard Pattern: ***3, ***2, ***4, ***5 or
Customized
8. Acoustic Principle: Resonance Absorption
9. Formaldehyde Emission: Can Meet Both China&EU Standard
Class E1
*0. Frame Retardant: Can Meet China Standard Class B, BS**6
Part 7 class,etc
Â
Â
Installation
__________________________________________________________________________________
Â
A) Preparation
1. The place of installation must be dry, with the lowest
temprature no less than *0 degrees Celsius.
2. After installation, the largest humidity changing rate of
the place of installation should be between *0%to *0%.
3. The acoustic panels which to be install must be storaged in
place of installation for at least *8 hours in order to adapt to
the indoor environment.
4. The distance between each wooden keel must be less than
**0mmand that between each light steel keel should be no more than
**0mm.
Â
B) Installation
1. Confirm the places of installation, determine the
horizontal and vertical lines, and determine reserved measurements
for the electric wire socket, pipes, etc.
2. Calculate the actual constrction measurements and cut part
of acoustic panels if needed.
3. Start to Install and follow the rules: from left to right,
from bottom to top For horizontally installation, make the grooves
up: for vertical installtion, make the tougue on the right. For
real wood veneer acoustic panels that have requirements on the
direction of the stripes, the panels should be installed according
to pre-marked sequence numbers
Â
C)Installation
System
1. Lightweight steel keel system
2. Wooden batten system
Â
Â
Pays: |
China |
N ° de modèle: |
-
|
Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
Localité: |
- |
Prix de commande minimale: |
- |
Commande minimale: |
- |
Packaging Detail: |
- |
Heure de livraison: |
- |
Capacité de Fournir: |
- |
Payment Type: |
- |
Groupe de produits : |
- |