Prix FOB
Obtenir le dernier prix40 ~ 1000 USD / Piece ( Negotiable )
|20 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
40 ~ 1000 USD / Piece ( Negotiable ) Obtenir le dernier prix
Localité:
Shenzhen, China
Prix de commande minimale:
40 per Piece
Commande minimale:
20 Piece
Packaging Detail:
paper carton, wooden pallet
Heure de livraison:
15days
Capacité de Fournir:
1000 Piece per Week
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter Lancy
Shenzhen, Guangdong
Product: YD058
Material: Aluminum alloy
Pipe size: RC1"
Flow rate: 2.8 m³/min, 98.9 cfm
Â
Coalescing Filters
Coalescing Filters are probably the most important items of purification requirements in a compressed air system, which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level as small as 0.01 micron in size. Usually, in the installation system, the fist filter's purpose is to pre-filter, protect the high efficiency filters from bulk contamination so as to provide high quality compressed air. If the air filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filter element, and the air flow would force the liquid to get through from the pores of the element media, thus increase working pressure drop and reduce filtration performance.
Â
Activated Carbon Filters
Oil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must provide large activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activated carbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. It's not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.
Â
Â
YD series compressed air filter details
1 Rational screw thread design and sophisticated thread processing save user's time and effort.
2 The A grade raw materials are used to ensure the product toughness, strength and stability.
3 The international leading anti-corrosion technology greatly enhanced the housing corrosion resistance, enlarged application field and avoid the secondary pollution from itself.
4 YUKA's core part-liquid mirror, checks the blockage condition of the drain.
5 The arrow marks let the operators understand clearly the air flow direction.
6 Â Parallel connection of the housing can save installation and maintenance space.
7 & 8 The DP gauge or indicator is equipped to measure the pressure difference and indicate premature blockage of the filter element, so as to prevent too big pressure difference and abnormal filter element blockage.(IF the indicating needle is in the green zone, it means no need to replace the filter element.)
Â
Â
Filteration performance:
Â
|
 Length unit corversion table |
 |  |  | ||
| 1km=1*10³m  1dm=1×10^(-1）m  1cm=1*^(-2)m 1mm=1×10^(-3）m 1dmm=1×10^(-4）m  | |||||
| 1μm=1×10^(-6）m  1nm=1×10^(-9）m |  |  |  | ||
| Volume concentration unit corversion table | Â | Â | |||
| 1ppm=1mg/L 1ppm=10³mg/m³  1ppm=10³ppb   1g=10³mg 1L=10m³ml 10³L=1m³ | |||||
Â
Â
Element StructureÂ
Â
Â
FPM seal ring blocks the air before and after filtering to achieve a better filtering effect.
Â
The supporting layer adopts stainless steel to ensure the filter element strength and the layered filtration design guarantees the element filtering accuracy.
96% porosity have strong capacity of holding dust, life span is up to 6000~8000 hours, general pressure difference is 0.17 to 0.25kg/cm, no exceeding of 0.65kg/cm.
The element cover is made of PA+GF material, free from deformation from -20℃ to 240℃ under 1.8Mpa pressure. Can also resist general acid and alkali chemical corrosion, with stand terrible compressed air environment, have extreme oleo phobic and hydrophobic ability.
The inside and outside supporting layers are made of stainless steel to ensure the filter element strength, and protect the glass fiber during production process, at the same time avoid damage to filter element due to the rusty material, and secondary contamination of the compressed air.
Â
Guarantee Air Quality
Please replace the filter elements with YUKA original products to ensure purified, dry and stable air.The element is constantly impacted by oil, acidic condensate and hi velocity dust particulates during the whole operation process, it also has to filter and keep protecting your compressed air system. It will weaken the filter media and reduce the filtering performance if it passed the replacement period. Technically, these hidden and serious reduction can not easily be detected by the differential pressure indication instruments. To replace the filter element every year is very essential. Failed to replace the m in time will lead to low product performance and air quality, as well as high production cost.
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 40 ~ 1000 / Piece ( Negotiable ) Obtenir le dernier prix |
| Localité: | Shenzhen, China |
| Prix de commande minimale: | 40 per Piece |
| Commande minimale: | 20 Piece |
| Packaging Detail: | paper carton, wooden pallet |
| Heure de livraison: | 15days |
| Capacité de Fournir: | 1000 Piece per Week |
| Payment Type: | T/T, L/C |
| Groupe de produits : | YD series air filter |
