Prix FOB
Obtenir le dernier prix( Negotiable )
|10 Set Minimum Order
Pays:
China
N ° de modèle:
XS-025
Prix FOB:
( Negotiable )Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
10 Set
Packaging Detail:
safety export packing
Heure de livraison:
15-20days
Capacité de Fournir:
10000 Set per Month
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
China
Personne àcontacter Clover
Xi'an, Shaanxi
Model XS***8
ÂManual
Â1. Comparing the cables/wires' diameters with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.
Â2. On the output side, if the cuts on the cables/wires are too deep, please check below points:
Âa. Please adjust the handles on the side,screw down or loose them. (M*2 handles)
Âb. Check whether the cables/wires on the right position as you feeding them.
Âc. Make sure the blades are sharp, if not, polish them with the oil stone
Â3. On the output side, if see the plastic (PVC) has been stripped, but the copper wires can not beendisgorged, please check below 4 points:
Âa. Polish the axis of the upside with the oil stone
Âb. Check whether the springs are loose, if yes, screw down to make them tighten
Âc. The diameter of the cables/wires are too small, please adjust the space between the two axises to 0.**0.6mm.
Âd. If the cables/wires you want to strip are hot, also can not get the copper wires stripped out.
Â4. If the cables/wires were blocked in the axises, please check below points:
Âa. If the springs on the press wheels are too tight, loose them.
Âb. There are too much oil on the cables/wires, please wipe it.
Â5. If see the blades tilted:
Âa. Check whether the center adjuster was loosed.
Âb. centering adjustment and adjust thescrews of two sides of it.
ÂÂ
ÂMake sure the cables/wires' diameter are similar with the feeding holes ,large cables/wires in large feeding holes, small cables/wires in small feeding holes, flat cables/wires in flat feeding hole.
Â
Pays: | China |
N ° de modèle: | XS-025 |
Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | 10 Set |
Packaging Detail: | safety export packing |
Heure de livraison: | 15-20days |
Capacité de Fournir: | 10000 Set per Month |
Payment Type: | Western Union, L/C, T/T |
Groupe de produits : | wire stripping machine |