Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
30days
Capacité de Fournir:
1000 Set per Month
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter Tian
Shijiazhuang, Hebei
Product Description
The JR series motor is a protective winding
type rotor three-phase asynchronous motor with cooling method IC*1
and continuous working system (S1). This series of motors can
provide a large starting torque at a small starting current and can
adjust the speed within a certain range.Â
The JR winding slip ring motor casing is a
cast iron casing or a steel plate welded casing with high
structural strength and good mechanical properties. The motor shaft
extension end and the non-bearing end have an inlet and outlet air
outlet, and the motor slip ring is located at the non-bearing end.
The series of motors have simple structure, convenient
installation, convenient maintenance, large starting torque and
safe and reliable operation. JR winding slip ring motors can drive
a variety of different machines, such as fans, compressors, pumps,
crushers, ball mills, winches, hoists, transport machinery and
other equipment, as well as mines, machinery, power plants and Used
as prime mover in various industrial and mining
enterprises.
The JR series motor is a wound rotor
three-phase asynchronous motor. This series of motors meets the
technical standard conditions. It can drive a variety of different
machines, such as fans, compressors, pumps, crushers, ball mills,
cutting machines, transport machinery and other equipment. It is
used as a prime mover in the machinery industry, power plants and
various industrial and mining enterprises. The rating of the JR
winding slip ring motor is based on the continuous working system
(S1). The frequency is *0HZ, the rated voltage is **0V/**0V, **0V,
**5V, ***0V, ***0V, which can be designed to ***0V/****0V according
to the needs of users.
The protection of this series of motors is
IP*3; the cooling method is IC*1; the structure and installation
method of the motor is generally IMB3, and it can also be designed
as vertical installation according to customer
requirements.
The ratio of the maximum torque to the rated
torque of the JR winding slip ring motor at rated voltage is not
less than 1.8.
The JR winding slip ring motor must be
connected to the starting varistor in the rotor circuit at the
start. It is not permissible to short-circuit the rotor windings
directly.
Product Parameters
Motor power range:
*0KW***0KW
Rated voltage:
**0V/**5V/**0V/**0V/***0V/****0V/***0V/****0V
Number of poles: 6/8/*0/*2
Rated frequency: *0Hz/*0Hz
Protection level: IP*3
Cooling method: IC*1
Working system: S1
Insulation class: B
Wiring method: â–³
Ambient temperature: ≥ **5 ° C and ≤ *0 °
C
The JR winding slip ring motor is suitable
for altitudes up to ***0 m and ambient air temperature is ***0
degrees. The protective motor should be installed in a room with
clean air, no dust, steam, acid, alkali and other corrosive gases.
It is not allowed to be used in an environment containing explosive
gas or dust.
Feature of Product
The JR winding slip ring motor casing is a
cast iron casing or a steel plate welded casing with high
structural strength and good mechanical properties. The motor shaft
extension end and the non-bearing end have an inlet and outlet air
outlet, and the motor slip ring is located at the non-bearing end.
The series of motors have simple structure, convenient
installation, convenient maintenance, large starting torque and
safe and reliable operation.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | 30days |
| Capacité de Fournir: | 1000 Set per Month |
| Payment Type: | T/T |
| Groupe de produits : | - |
