La description
Wood shavings are mainly used for mass production of thin slices
of wood shavings, is a special for wood processing for the
shavings of the equipment. It consists of a rack, a platform
placed on a frame, a knife holder fixed to the platform, the wood
entering the machine from the feed inlet, slicing the blade
inside the machine, shaving the shavings, the size of the
shavings, There is no difference between the handmade shavings.
Â
　　Product Usage
Â
　　You can do particleboard (plywood), paper mills to do the
raw materials of wood pulp paper, transport companies to do
fragile goods transport fillings for small pigs, cattle, sheep
and various animals to do the filling of the nest, can also be
used as Bioenergy.
Â
　　Features
Â
　　The machine can be logs, branches (branches), board edge
processed into shavings, produced by the shavings and furniture
factory produced shavings, automatic feeding equipment, greatly
improving the production speed, but also save time and manpower.
The machine is automatically crushed wood processing into the
wood shavings of the equipment, raw materials from the feed inlet
into the first, the first blade, cutting into the crushing
chamber, by the impact of high-speed rotation of the hammer and
cutting knife under the appointment of crushed by the built-in
wind Leaves produced by the wind through the screen to send out
the mouth or external fan pumping outlet. The size of the
shavings is determined by adjusting the length of the blade and
the size of the mesh to accommodate a variety of needs.
Â
　　Use the fault and the solution
Â
　　(1) When the wood shredder is used, the belt is easy to
bite because the rotor of the motor and the wood shredder are
different from each other, and the position of the motor can be
moved left or right, or the pad is placed under the foot of the
motor to adjust the concentricity of the two rotors degree.
Â
　　(2) wood shavings shredders production is relatively low.
Cause: The blade is not sharp or the knife is not adjusted to the
right position. Solution: Remove the knife, repair blade, adjust
the blade to the appropriate chip position.
Â
　　(3) feeding difficulties, knife and chip difficult. Reason:
knife wear serious, fixed knife gap is too large or too small.
Solution: grinding blade, to ensure that the blade sharp. Adjust
the knife gap **3mm, blade angle can not be greater than *0 °.
Â
　　(4) Feed too fast machine crash. Reason: the feed speed is
uneven, the blade is not sharp. Solution: uniform feeding, to
ensure that the silty warehouse is not expected. Grinding blade,
so that knife chip speed. (5) bearing heat. Cause: There is no
butter in the bearing housing, the bearing is not flat and the
bearing is damaged. Belt installed too tight. Solution: bearing
the addition of butter, bearing seat balance, new bearings,
adjust the belt elastic, so that equipment work properly.
Â
　　Daily maintenance
Â
　　(1) after the use of the belt every day to adjust the
elastic, down ***0mm appropriate.
Â
　　(2) clean the inside of the machine, can not leave the last
crushed material.
Â
　　(3) bearing timely filling butter, continuous **4 hours of
filling a butter, should pay attention to observation.
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
2000 ~ 4500 / Set ( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China Henan Zhengzhou |
| Prix de commande minimale: |
2000 per Set |
| Commande minimale: |
1 Set |
| Packaging Detail: |
Wooden box |
| Heure de livraison: |
15 to 30 days |
| Capacité de Fournir: |
20 Set per Month |
| Payment Type: |
Other, L/C, T/T |
| Groupe de produits : |
wood crusher
|
