Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
Poland
N ° de modèle:
Skorpion 250R/90
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Poland
Personne àcontacter Mr. Tomasz
swietokrzyska, Ostrowiec Sw.
Skorpion **0 RG/*0 with crawler chain conveyor has
been designed for shredding tree limbs and trunks/stubs with
diameter of **0 mm.
It’s a mobile disc model with pneumatic blow-out system installed
on the disc. Chips are ejected through a rotary chimney which can
turn by **0° in relation to the chassis. The machine to
collaborate with over **0 hp farm tractor.
The cutting system of this chipper consists of a disc with cutting
knives suitable for sharpening on either side. The drive is
transmitted from PTO shaft of a tractor with the speed of **0 or
***0 revolutions per minute.ÂÂ
The essential equipment of the chipper includes a hydraulic
propulsion system servicing the upper feeding roll and a crawler
installed instead of normally used lower roll. Such solution allows
for easier loading of wood, improves operator’s work and enhances
efficiency. Both of them are driven by hydraulic motors. All above
mentioned devices are driven by its own hydraulic pump. A lever
type of control system connected with the hydraulic divider allows
changing the feeding direction.
The construction of the chipper is set on a single axial chassis
that enables the device to be towed behind a tractor on forest and
field roads. Innovative solution of the lateral position of the
feeding table enables simultaneous transport of chipper and trailer
with a tractor.
Due to large size of the material to be chipped, the machine can be
equipped with a hydraulic mounted crane.
As a standard, the chipper is also additionally equipped with an
electronic system of work control, automatically protecting the
propulsion system of the machine against overload/excessive duty
through temporary stopping the feeding unit.
Overall dimensions (LxWxH) ***0 x ***0 (***0 dimension after the
pipe is raised, during operation) x ***0 [mm]
Weight ***0 without hydraulic crane [kg]
Branch diameter **0 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to *2 [running meters/min]
Chipping capacity up to *8 [stre meters/h]
Chip width from 9 to *4 [mm]
Method of feeding mechanically by crane or manually
Disk diameter **0 [mm]
Hopper dimensions (WxH)  **0 x **5 [mm]
Min. power of tractor **0 [hp]ÂÂ
Equipment included:
-PTO shaftÂÂ
-Independent hydraulic system
-Adjustment of height of ejecting the chips
-Rotary chimney **0°
-No-stress system
Additional accessories on request:
-Extension of the ejection tube
| Pays: | Poland |
| N ° de modèle: | Skorpion 250R/90 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
