Wireless Traffic Vehicle detection Sensor Same to Sensys ITS Solution By Rosim ITS Technology Co.Ltd,

SpÃ©cification du produit

Brand Name: ROSIM
Usage: Magnetic Sensor
Theory: Inductance Sensor

Average lifespan:10 years
Installig time:5 minutes
Accuracy:>97%
Communicate distance:150 meters
Protetion standard: IP68
Operation temperature:-40~85
diameter:116mm
height:90mm
Update:OTA
Communication:Wireless 433MHz

La description

Product Description

Wireless Vehicle Detector (WVD) is based on magnetometer, short range RF and nano power communication protocol technology. It is installed onto the road surface to collects the data of traffic flow. The data is gathered by Wireless Access Point (WAP), which acts as a wireless gateway between the wireless vehicle detection system and other traffic application systems. All the WVDs, under the management of WAP, establish a local wireless sensor network, which collects traffic information real timely.

Major advantages:

a) Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;

b) Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;

c) No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ **0/H **0 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;

d) About *0 years long life span. With high standard water proof and anti-press characteristics, WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.

e) Cost saving. You just can use the cement which is about $2 for **4 sensors.

f) Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost *0 minutes for the devices wireless updating;

g) Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loops, video, micro-wave etc. in the market. This appears more and more significantly to our environments;

h) Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in your system directly.

Functions of Detector

a) Vehicle existence measurement b) Vehicle move direction measurement

c)Average traffic flow speed measurement d)Vehicle type classification

e)Temperature measurement f)Battery measurement

How does it work?

By capture the tiny change of magnetism caused by the passing vehicle, WVDs (Wireless Vehicle Detector) calculate the vehicle velocity, length, type and occupy rate rapidly, and then send these information to the WAPs (Wireless Access Points), which will receive all the on line WVDs’ information and transmit these data to the user systems through RS***2/**5, Internet, GPRS, etc..

Application:

(1) Adaptive Traffic Signal Control System

(2) Traffic Information System

(3) Red Light and Speed Enforcement

(4) Corridor Management

(5) Traffic Flow Monitoring System

Company Information

Company Information:

Rosim ITS focuses on the innovation and manufacture of wireless vehicle detector solution and real-time traffic information collection system. By virtue of the application of advanced sensing technology, wireless communication technology, and many years’ experiences in this field, Rosim ITS is successes in creating the WVD series wireless vehicle detector products and WAP series wireless access point, which build up a real-time wireless vehicle detection solution and traffic information monitoring system. In the past 5 more years, Rosim wireless vehicle detecting products had successfully replaced loops to monitor vehicles and the relative velocity, occupy rate and traffic flow in many projects of artery, freeway and intersection applications, for example in traffic flow monitoring system, red signal and speed enforcement, traffic lights optimization, traffic guide and traveler information systems, adaptive traffic signal control, arterial performance measurement, etc..

Maintenance and Support :

Rosim ITS provides our customers high quality wireless vehicle detecting products and solutions, all the products support wireless updating, which makes it easily

maintained. Also, Rosim ITS provides *4 hours on-line supports .

Welcom to visit and feel free to contact us!

Our Services

Skype: rebecca.ou6

Mobile:**6 **********0

TEL: ************6

Fax: ************2

Our Services

1. All inquiries will be replied within *4 hours.

2. We provide professional staff to follow you by mail, phone or chating online with English.

3. To ensure the quality of products, all of them must be test again before delivery.

4. Unique problems can be solved by our professional engineers.

5. One year products quality guarantee.

6. After sales service and technical support.

7. Offering relative certificate according to your requests.

Pays:	China
N Â° de modÃ¨le:	WVD-13x
Prix FOB:	(Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	-
Commande minimale:	10 Set
Packaging Detail:	Standard Package Carton:400300200cm Qty: 12 sets/carton
Heure de livraison:	30 days after payment
Capacité de Fournir:	10000 Set per Month
Payment Type:	T/T, Western Union, Other
Groupe de produits :	WVD-Wireless Vehicle Detector