Wind Turbine Grid Tie Power Inverter 1000W/500W/250W

La description

1.Build In Rectifier
2.Build In Dump Load Controller
3.Build In HighWind Protection
4.AC

Preface
The grid-tie inverter can transfer wind energy from wind generators directlyinto the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid.

The model of grid tie inverter has build in bridge rectifier, and the model of WD has reverse protection, All models have a high voltage protection function, when the wind is too big, the grid tie inverter will disconnect itself from the wind turbine, so it is very safe to use it.

Layout
There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the wind turbine, and the 2 black terminals will be connected to dump load resistors.
There are 4 LED indicators, 3 green indicators and 1 red indicator. 3 green LED indicators will start to cycle from left to right when the grid and AC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The more big output power is,the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Anti-island Protection”.

Electrical Specifications:
Model                                  SUN***0G-WAL      SUN***0G-WAL      SUN****0G-WAL
Normal AC Output Power        **5W                        **0W                        **0W
Maximum AC Output Power   **0W                        **0W                       ***0W
AC Output             Switch is at **0V Position        **0V ~ **0V
Voltage Range    Switch is at **5V Position         *0V ~ **0V
AC Output Frequency Range                                     *6Hz ~ *5Hz
Total Harmonic Distortion(THD)                               <5%
Power Factor                                                                0.*9
AC Input Voltage Range (Optional)                        *0.8V ~ *0V / *2V~*0V
Peak Inverter Efficiency                                             *2%
Standby Power consumption                                   <1.5W
Output Current Waveform                                         Pure Sine-wave
MPPT Function                                                              Yes
Over Current Protection                                             Yes
Over Temperature Protection                                   Yes
Reverse Polarity Protection                                       Yes
Anti-Island function                                                       Yes
Stackable                                                                        Yes