Prix FOB
Obtenir le dernier prix|
20 Metric Tons Minimum Order
Pays:
China
N ° de modèle:
WD-SJ601
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
20 Metric Tons
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
200Metric Tons / Month
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Mr. Fang
Shuangyang, Linghai, Liaoning
International Standards:EN**0 A FB 1 *7 AC H5 GB/T *********9 F***-H0Cr*1Ni*0 F***-H0Cr*9Ni*2Mo2 F**8L-H*0Cr*1Ni*0 F**6L-H*0Cr*9Ni*2Mo2 Introduction WD-SJ**1 is an agglomerated aluminate-fluoride basic type soldering flux for submerged arc welding with a basicity index of BIIW 1.8. The flux is spherical granular, grain size is from *0 to *0 ***** welded metal is very purity and shows excellent mechanical properties. The diffusible hydrogen content is less than 5ml/**0g. It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. It is suitable for submerged twin-wire, tandem and multi-wire welding as well as for welding with the two-run technique. The special production method ensures that the flux has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate. Applications Flat butt, fillet and joint welding of stainless and low carbon stainless steels.Surfacing of mild steels and low alloy steels. Characteristics Using WD-SJ**1 flux there is minimal chromium loss in the deposit. Welded metal of austenitic structure containing comparatively large amount of ferrite shows excellent crack resistance, corrosion resistance and mechanical properties. It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches. The welds are smooth and without slag residues. Main Constituents (%) SiO2+TiO2 CaO+MgO Al2O3+MnO CaF2 S P *5 *0 *5 *5 ≤0.*6 ≤0.*8 Typical mechanical property of deposited metal Matching wire Tensile strength(MPa) Elongation(%) Sulphuric Acid-Copper Sulphate Corrosion Test Charpy V notch impact strength***6°C (J) H0Cr*1Ni*0 ≥**0 ≥*0 Good —— H*0Cr*1Ni*0 ≥**0 ≥*5 Good —— H0Cr*9Ni*2Mo2 ≥**0 ≥*5 Good
| Pays: | China |
| N ° de modèle: | WD-SJ601 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 20 Metric Tons |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 200Metric Tons / Month |
| Payment Type: | - |
| Groupe de produits : | - |
