La description
waste vehicle oil
recycle machine
Because the
waste oil contain too much contamination, including
non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal
hydronium, impurities, metal particles, asphaltene and colloid
etc. and due to the traditional technology only can refine the
waste oil to base oil, can't use directly, so our company is
researching the new technology about distilling equipment, which
can distill all kinds of waste oil into clean oil, easy to
operation, and the lower operation cost.
1.Working
principle of waste vehicle oil recycle machine
This
equipment adopt physicochemical actions to polymerize, passivate,
absorb and eliminate impurities and harmful contamination. We
research a new chemical alkaline complex catalyst, which can
restore and regeneration the Waste oil to clean oil, save the
component of the oil.
2. Advantage
of waste vehicle oil recycle machine
It's easy to
produce waste residue and bad smelling by traditional vitriol
distilling, which will bring potential secondary pollution,
moreover, it's easy to change the color to black and produce the
odor due to the recycled oil react with the oxygen. But after we
use the alkaline complex catalyst refines the oil, the recycled
oil haven't change the color and haven't create the odor. What's
more important, you can use the resid to be as the fuel to
heating the oil, without any pollution. And the equipment is easy
to operate, only **2 workers can control the
equipment.
3. Main
components of waste vehicle oil recycle machine
a. Catalyst
system: Catalyst Reactor, blender;
b..
Chemistry treatment system: Chemistry reactor, blender,oil
pump
c. Heating
distilling system: distilling tower, distilling kettle, heater,
circle pump;
d. Cooling
system: refrigerating equipment, water pump, water tank, cooler
I,cooler II, Condenser;
e. Vacuum
system: Vacuum water receiver, vacuum pump, vacuum
cooler
f.
Degasification system: vacuum exhauster, exhaust fan,
degasification plant, water pump,
radiator,deodorizer.
g. oil
storage system: distilling storage tank
h. Control
system: all kinds of gauge( vacuum gauge, pressure gauge etc.)
and electricity controller tank
Â
4. Working
Principle of waste vehicle oil recycle machine
A proposal
for processing waste lube oil and industrial oils, using high
vacuum distillation technology is presented here. The various
steps involved in the projects are given below.
Step1: The
waste oil is pre-treated and then send to chemical processing
kettle and react with catalyst.
Step2: This
waste oil is approx **0 degree at 0.**8Mpa to have water and some
light fractions separated.
Step3: The
temperature is keep rising up to ******0degree at **0Pa , the
lighter fractions such as gasoline, diesel are distilled and
cooled and then stored in diesel receiving tank.
Step4: The
undistilled waste oil subjected to high vacuum, medium
temperature in the heated distillation plant, the light base oil
fraction is distilled and cooled and then collected in the light
base oil tank( above **0degree and at a pressure of **0Pa). The
distilled oil will have a viscosity of higher than SN**0 at
ambient.
Step 5: The
undistilled waste oil subjected to high vacuum, high temperature
in distillation plant, the heavy base oil fraction is distilled
and cooled and then collected in the base oil tank ( above
**0degree and at a pressure of **0Pa). Distilled oil
approximately higher than SN**0 in viscosity).
Step6: The
distilled oils are clean oil generally no need further treatment,
they are going to be blended with additives to get finished oils
for the automotive and industrial applications.
Step7: The
final residue is semi solid at ambient and can be processed for
manufacturing asphalt, finished to make off-speck heavy fuel oil
or to make greases for slow moving equipment.
Â
5. Features
1. Easy to
operate, low operation cost
2. Environmentally
friendly, without secondary pollution.
3. The equipment
can recycle gasoline oil, diesel oil, engine oil, rubber oil and
other lubricant oil to clean oil.
4. High quality
refined oil, no any discoloration caused by oxidation, no any bad
smelling.
5. Low cost
contain:
1) only need the
catalyst chemical, the cost is less than US$*0 to refine one ton
waste oil.
2) Heat
consumption: **5 kcal per ton waste oil
3) Power
consumption: *0Kwh to recycle 1 ton waste oil
6. High degree of
automation.
|
The detail of recycled light oil and heavy oil
|
|
item
|
Heavy base lube oil
|
Light base lube oil
|
|
appearance
|
lucidity
|
lucidity
|
|
color ≤
|
1.5
|
1
|
|
Viscosity(*0degree)mm2/s
|
*9.*7
|
*6.*6
|
|
Viscosity index  ≥
|
*6
|
*5
|
|
anti- oxidation  **0degree,
min  ≥
|
**0
|
**0
|
|
de-emulsification, 5degree,
 min
|
5min
|
5min
|
|
Flash point (opening)degee ≥
|
**8
|
**4
|
| Pays: |
China |
| N ° de modèle: |
DIR vaccum distillation
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
packed in strong wooden case, it is suitable for long distance transport |
| Heure de livraison: |
40workdays |
| Capacité de Fournir: |
100 Set per Year |
| Payment Type: |
L/C, T/T |
| Groupe de produits : |
lubrication oil regeneration mchine
|
