WASP100 NANO CPX 6 CH fairless 3D LCD 2.4GHz helicopter

La description

Thank you for purchasing SKYARTEC WASP NANO CPX Brushless helicopter which is considered high-perfermance,easy control,stable,durable and light weight. WASP NANO CPX adopts with *-axis gyro system, incredible real-time responding in any 3D stunt flying. Furthermore,it offers good stability and agility with configurating LCD 2.4GHz 7CH radio control , adopt *********0KV Brushless high-powered motor and *2A Brushless Esc .



SPECIFICATIONS:



  Length: **5mm



  Height: *5mm



  Main rotor diameter: **0mm



  tail rotor diameter: *6mm



  motor pinion gear: 8T



  Main Drive Gear: *7T



  Flying Weight: *8g







 







STANDARD CONFIGURATION:







 5 in 1 receiver board C;  3.7V **0mah LI-PO battery; *********0KV brushless motor; tail motor;  2g servo(5 lines)x3;  *2A brushless Esc; USB charger cable;  USB power supply;  special screw driver; SKYARTEC CD; NASA**1 LCD 2.4GHz 7ch TX.







 







FEATURES:







  1. The fuselage adopt strong, durable , special plastics  



  2. Hi-performance *-axis flybarless system by SKYARTEC provides with much  more stability, 



functionality and capability.



  3. Amazingly compact all-in-one and lightweight design will guarantee you  the most fresh and 



exciting flight experience. 



  4. Advanced configuration helps you control the helicopter precisely and  have the incredible 



real-time response which performing a variety of stunt  flying skills. 



  5. Five in one board integrating receiver, *-Axis gyro, servo, main  Brushed ESC, tail Brushed ESC.



  6. Free to change flight mode:(Long press the on receiver, handsoff after the indicator



 light change color. Blue light is for beginner flight mode, red light is for 3D flight mode).



Notices:                     







 1.  All signal wire connectors must be connected correct as required, otherwise will result failure of receiving remote signal, even receiver burnt and so on serious consequences.



 2. To avoid the knob broken, it needs to use the special configured adjust pen when adjusting all knobs.  



 3. When code-pairing, helicopter must be satic placed horizontal position.                             



 4. When boot should follow the principle of “turn on the transmitter first then power on the plane”. After turn on the transmitter, power on the plane within *0 seconds, receiver’s indicator light start flashing slow about 1~3 seconds, which means it is receiving the signal.If the light not on, it means receiving no signal, code-pairing is needed. Indicator light flash fast after receiving signal, which means the gyro is initializing. If the red light turn to constant light, and sound the mechanical voice of servo reset, which means the receiver start to work.