Virgin /Recycled HDPE, LLPE, LDPE, LLDPE and PP Resin/Granules/Pellets film grade By ANGLO COMPANY PTY,

Virgin /Recycled HDPE, LLPE, LDPE, LLDPE and PP Resin/Granules/Pellets film grade

Prix FOB

400 ~ 800 USD / Metric Ton

24 Metric Ton Minimum Order

Pays:

South Africa

N Â° de modÃ¨le:

Prix FOB:

400 ~ 800 USD / Metric Ton (Negotiable) Obtenir le dernier prix

LocalitÃ©:

South Africa

Prix de commande minimale:

400 per Metric Ton

Commande minimale:

24 Metric Ton

Packaging Detail:

25kg/bag

Heure de livraison:

7 days after payment confirmation

Capacité de Fournir:

10000 Metric Ton per Week

Payment Type:

T/T, Western Union, Money Gram

Groupe de produits :

SpÃ©cification du produit

1. Virgin & Recycled
2. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade,
3 hdpe resin

1. we are direct factory, different MFR or MFI are available for your different usage.

2. good quality and reasonable price

3. non-poteonods no smell adurless

4. it can replaced original plastic material, sometimes it can replace new material

HDPE:

HDPE cable material Property	Unit	Typical Value
Mass density	g/cm 3	0.**0.9
Melt flow Rate(*0 centidegree /2.6kg)	g/*0min	≤1.0
Tensile yield strength	MPa	≥*9.0
Flexural modulus	Mpa	≥**5
@*******************	%	≥**0
Impact Embrittlement temperature	centidegree	MAX ***8
Dielectric Constant	**0KHZ	2.*2
Dielectric Constant	1MHZ	2.*1
Loss Tangent	**0KHZ	MAX 0.***1
Loss Tangent	1MHZ	MAX 0.***1
Volume resistivity	OHM-CM	MIN 1x0 5
Application	Mainly used for the production of high toughness of the telephone,cable insulation material

LDPE:

Physical Properties		Test Method	Nominal Value	Unit
Density		ISO ***3	0.**1	g/cm3
Melt Mass-Flow Rate (MFR)		ISO ***3	1.9	g/*0min
Hardness
Shore Hardness (shore D)		ISO **8	*5
Mechanical Properties
Tensile Modulus		ISO ****2	**5	MPa
Tensile Strength	Yield,	ISO ****2	9.0	MPa
Tensile Strength	Break,	ISO ****2	*3.0	MPa
Tensile Strain(Break)		ISO ****2	**0	%
Modulus of Elasticity		Internal Method	**0	MPa
Thermal
Vicat Softening Temperature		ISO *6/A0	*9.0	°C
Melting Temperature (DSC)		DIN ****5	**8	°C
Peak Crystallization Temperature (DSC)		DIN ****5	*7.0	°C
Heat of Fusion		DIN ****5	**0	J/g
Electrical
Volume Resistivity		ASTM D**7	8.5E**5	ohm •cm
Dielectric Strength		ASTM D**9	*0.0	kV/mm
Dielectric Constant (*0Hz)		ASTM D**0	2.*0	%
Dissipation Factor (*0 Hz)		ASTM D**0	0.****0

LLDPE

Properties	Test conditon	Test method	Test data	Unit
Density			0.*1
MFI			2
Drop impact strength		ASTM D****9	*0	g
Elongation ,vertical/horizontal		ASTM D***2	0/0	%
tensilestrength,thermal resistance		ASTM D****4	*5/5	Kg/cm
elongation		ASTM D***8	**0	%
tensile strength		ASTM D***8	**0
tensile strength,vertical/horizontal		ASTM D***2	0/0
Vicat softening point		ASTM D****5	**3	°C
melting point		ASTM D****7	**6	°C
Turbidity		ASTM D****9	*2	%
*5 glossness		ASTM D****7	*5	%

Pays:	South Africa
N Â° de modÃ¨le:	-
Prix FOB:	400 ~ 800 / Metric Ton (Negotiable) Obtenir le dernier prix
LocalitÃ©:	South Africa
Prix de commande minimale:	400 per Metric Ton
Commande minimale:	24 Metric Ton
Packaging Detail:	25kg/bag
Heure de livraison:	7 days after payment confirmation
Capacité de Fournir:	10000 Metric Ton per Week
Payment Type:	T/T, Western Union, Money Gram
Groupe de produits :	-