Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
PE
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
container
Heure de livraison:
15 to 20 days
Capacité de Fournir:
200 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter Claire
Zhengzhou, Henan
Brief introduction:
One of the most popular stone-crushing equipments in the
world, jaw
crusher is ideally suitable for primary
and secondary crushing. The highest anti-pressure strength of
crushed material is **0Mpa.
Working principle:
Jaw crusher’s working portion is made by two jaw plate, one is
fixed jaw plate, vertical(or upper slightly outward)fixed on the
machine front wall, another is moving jaw plate, it tilts and it
forms crusher chamber(working chamber) with fixed jaw plate. Moving
jaw plate moves to fixed jaw plate seasonally, sometimes separate
sometimes closed. When they are separate, final product is
discharged from bottom; when they are close, the material between
them will be crushed, curved and split.
Advantages:
1.Unique design
2.High capacity
3.Broken chunks of material
4.Efficiency, energy saving
5.Low operating costs
6.Adaptability
7.Long life
8.High safety factor
Buy note:
First: First concern is the crusher feed size and particle size of
the nesting, Feed particle size more big, product size becomes
coarse, feed particle size is smaller, the greater of the product
size. So, you want to buy different models of jaw crusher according
to the actual situation.
Second: Need to focus on the quality of jaw crusher liner. In the
purchase of a jaw crusher, users generally need to consider three
factors: production, liner wear and power consumption of the
device. Generally, buyers need to focus on the maximum feed size of
the equipment, changes in particle size, feed size distribution,
Hardness and wear resistance of materials.
Third: General, jaw crusher liner length is proportional to the
size of its power, the longer liner, power consumption is higher,
generally, Soft material selection long liner, hard materials
selection short liner. In the distribution of materials, Fine
material selection short liner, thick material selection long
liner.
Fourth: relatively large water content of the material will affect
the material through, water is generally not exceed 5% of the
material, The use of power, the standard model of jaw crusher
should reach about *0%, the short head type of jaw crusher should
reach about *5%.
Fifth: Generally, the feed size of jaw crusher, Less than the
closed side of the discharge port of the material can not exceed
*0%, more than once, it will lead to increased power consumption of
the equipment, the product will become a piece granularity
shape.
Sixth: During jaw crusher work, we must ensure that the feed must
be uniform, do not have segregation, otherwise it will lead to
decline in production capacity, product size is not uniform, the
spring action too often; the power consumption will follow the
rise. Another point is that, be sure to install the device in
addition to iron, if there is excessive iron products frequently
appear in the silo, then there may be cause shaft phenomenon
broken.
Seventh: jaw crusher working environment is bad, the dust will be
relatively large, in addition, some units do not pay attention to
maintain the equipment, sometimes there will be some kinds of
problems in the use of the process, so the maintenance of equipment
is necessary.
Â
| Pays: | China |
| N ° de modèle: | PE |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | container |
| Heure de livraison: | 15 to 20 days |
| Capacité de Fournir: | 200 Set per Month |
| Payment Type: | T/T, L/C |
| Groupe de produits : | Stone crusher |
