La description

1.General description
Material is fed into the dryer from feeding port, under the action of vibrating force, material moves forward with the fluidized state continuously along the horizontal direction. Hot air passes through fluid bed from bottom to up and does heat exchange with damp material. After the powder is collected by cyclone separator, damp air is exhausted out. Dried product is discharged from discharging port.
 
2.Features
1、Upper bed and bottom bed adopt the new quick-open type structure, upper bed can be moved quickly. It is easy to clean completely.
2、Bed plate adopts laser punching way to make, it can avoid the bed plate be out of shape during the common punching process
3、Bottom plate is supported by stainless steel seamless tube, the structure of bed is stronger, and operational life is long
4、Material is heated uniformly, heat exchange is full, drying intensity is high, energy saving is about *0% than common dryer.
5、Vibrating source is vibrating motor, its work is stable, easy to maintain, noisy is low, life is long.
6、Fluidized state is stable, no dead corner or broken out phenomenon
7、Adjustability is good, and application scope is wide
8、Small damage to the surface of material, it can be used for drying breakable materials. It doesn’t effect the work efficiency when the shape of material is irregular.
9、Adopts all closed structure, it can avoid the cross pollution between material and air effectively. Work environment is clean.
 
3.Application scope
Â

1. Chemical and pharmaceutical industries: All kinds of granules for pressing tablet, xylopyranose, succinic acid, cylosic alcogol, mannitol, boric acid, borax, dihydroxyhenzene, malic acid, maleic acid
    Foodstuff industry: Distillers’ grains, aginomoto, granulated sugar, casein, chicken essence, salt, mineral waste residue, halves of a bean, seeds
   It also can be used for cooling and wetting
    
   Â

   Model(ZLG)	Area of fluid bed（㎡）	Inlet air temperature（℃）	Outlet air temperature（℃）	Water evaporation（kg/h）	Vibrating motor
   					Model	Power（k w）
   3×0.3	0.9	*****0	****0	****5	ZDS***6	0.8×2
   4.5×0.3	1.*5	*****0	****0	****0	ZDS***6	0.8×2
   4.5×0.*5	2.**5	*****0	****0	****0	ZDS***6	1.1×2
   4.5×0.6	2.7	*****0	****0	****0	ZDS***6	1.1×2
   6×0.*5	2.7	*****0