La description
vehicle truck
scale weighbridgeÂ
Technical Index of SCS-MU Truck Scale/Weighbridge
Â
|
Accuracy
Class:
|
IIIÂ Â Â Â Â
|
|
Rated
capacities:
|
*0, *0, *0,
*0, *0, *0, *0, **0, **0t
|
|
Widths of
platform:
|
3 or
3.4m
|
|
Lengths of
platform:
|
6, 8, *0, *2,
*4, *6, *8, *0, *2, *4, *6, *8m
|
|
CLC
(Concentrated Load Capacity):
|
up to
*0t
|
|
Max. span
deflection ratio:
|
1/**0
|
|
Overload
limit:
|
**0%
|
|
Foundation:
|
above ground
or pit type
|
|
Division:
|
*5kgs, *0kgs,
or *5 kgs
|
Â
Fuzhou Kejie is China’s largest
manufacturer of top quality truck scales/weighbridges with
different sizes and capacities.
Â
MainFeatures:
1.     The
realmodularized structure,
outstanding exchangeability
Â
2.     Finite
Element Analysis of Kejie truck scale/weighbridge under excessive
loading and usage conditions
  The
SCS-MU truck scale/weighbridge design was refined by one of
Chinese leading structural engineering consulting firms. The
design was modeled using state of the art software and then a
finite element analysis carried out under severe overloading and
point loading conditions. The model also simulated the results of
thousands of weighings. This information was used to further
strengthen and refine the design of the weighbridge. The end
result is a superior product that has already proved
itsworth in many tough
environments.
Â
3.     Outstanding
rigidity and heavy duty structure
Full diamond top plate, the thickness
is *0mm; 8 pieces of 6mm thick u-beams in each bridge section,
whereas, other suppliers use 4 or 6 u-beams with plate thickness
less than 5mm. All u-beams are bent by bending machine at a time.
This monster, with maximum power of **0t, can bend steel plates
with length to 8m. Our high quality u-beams ensure the truck
scale/weighbridge outstanding rigidity. The maximum span deflection
ratio of our modular truck scale/weighbridge is 1/**0, whereas,
the span deflection ratio of
other Chinese suppliers' structure is about 1/**0, which is
not rigid enough and results in the deck plate deformed and become
wavy.
Â
4.     High
quality welding
We use CO2 Protection
Welding andShielded Arc Welding,
standard fillet weld with no end, the minimum weld leg length is
8mm.
All welding of u-beams
are processed on standard welding platform. Each welding platform is
equipped with a press device, which can offer **0t pressure on
weighbridge u-beams. After welding, the press will be kept on the
u-beams for *4 hours to release the internal stress and avoid the
structure deformation. All welding lines are tested by ultrasonic
flaw detection.
Â
5.     Exceptional
rust and corrosion protection, outstanding resistance to
wear
Â
Step 1:
Sandblasting
External surfaces of
all modules undergo complete sandblasting to remove any
contaminants such as mill scale, welding gases, oli or
other residue. We use a centrifugal steel shot blasting
system which blasts a mixture of steel grit and steel shot
simultaneously to remove contaminants. If the steel is not
properly cleaned, paint will flake and wear away,
diminishing   its appearance, exposing the scale
to the elements and shortening its lifespan. Although paint can
initially hide much of this residue on a lower
quality weighbridge, it will quickly appear once in the
field. We use an intense cleaning process to remove all foreign
materials and residue before painting to ensure proper
bonding of the paint. Â
Sandblasting
Cleaning: Sa3.0;Â Â Â
Surface Roughness: *0~*5μm
Â
Step
2:Protective
coating
After surface
cleaning, the weighbridge is moved to dust-free painting room,
and all steel surfaces are sprayed with a protective coating to
prevent the steel from moisture.
Â
Step 3: 2 coatings of epoxy zinc
primer
Eight hours after
protective coating, all weighbridge surfaces are sprayed a
coating of high performance epoxy zinc primer. Twenty-four hours
under constant temperature of *5℃, another coating
of epoxy zinc primer will be sprayed. The thickness of 2 primers
is over *0 micron.
Â
Step 4: 1 coating of alkyd enamel
finish
Twenty-four hours
after the 2nd primer, high quality alkyd enamel finish is
applied. The thickness of the finish is over *0 micron.
Â
6.     More
pieces of weighbridges can be loaded into a *0ft
container
Our SCS-MU Modular Metal Truck
Scale/Weighbridge is specially designed as per the inner dimension
of *0ft container. The full use of container is to the utmost. For
example, for 2 units of *8x3m, *0t truck scales/weighbridges, we
need only one *0ft general purpose container to fit. Whereas, other
suppliers need one *0ft container to fit the same quantity truck
scales.
| Pays: |
China |
| N ° de modèle: |
SCS-MU-30t/40t/60t/80t/100t
|
| Prix FOB: |
3000 ~ 8000 / Piece ( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
3000 per Piece |
| Commande minimale: |
1 Piece |
| Packaging Detail: |
platform by nude packing, accessories by carton packing |
| Heure de livraison: |
15days after receipt of 30% deposit payment |
| Capacité de Fournir: |
1 Piece per Day |
| Payment Type: |
T/T, L/C, Western Union |
| Groupe de produits : |
truck scale
|
