La description
Advantages
1. Wear resistance: suitable for grinding any super hard particles
(such as diamond);
2. Powder fineness: the longer the time is, the finer the powder
will be. At the same time, the fineness of micron or nanometer
level can be achieved by setting the time automatically;
3. High degree of automation, improve efficiency: replace manual
grinding, save manpower, only a few minutes for each grinding;
4. Easy to use: small size, light weight, easy to move, convenient
to pour materials, easy to clean mortar;
5. High cost performance: can compare the price of similar imported
grinding equipment.
Applicable
conditions
1. Requirements for abrasive particles: no limit on particle
hardness, particle size
≤0.5mm;
2. Grinding method: dry grinding or wet grinding;
3. Grinding temperature requirements: There have been quite many
successful cases for some special particles (or powders) that are
flammable and explosive due to temperature rise in the grinding
process, but the specific situations can only be determined after
further communication or test with us;
4. Requirements for grinding amount every single time: this
machinery is particularly suitable for the grinding amount under
*0g (If the grinding amount needed is larger, TYM**0 powder grinder
from our company is strongly recommended);
5. Particles (or powder) suitable for grinding: micro powder of
super hard materials (such as diamond wheel abrasive micro powder),
electronic micro powder (semiconductor micro powder, polysilicon
micro powder), resin micro powder; pharmaceutical micro powder,
chemical micro powder (such as iodine micro powder), food micro
powder (coffee powder), and so on;
6. Applicable power supply: **0V.
Working principles
1. The ceramic mortar is driven by a slow speed motor to rotate
(the bottom of the ceramic mortar is a grinding surface that meets
the grinding requirements, hard, wear-resistant and very
smooth);
2. The ceramic grinding rod is tightly adhered to the bottom of the
ceramic mortar under the action of the compression spring.
3. The grinding bar is driven by the fast speed reduction motor,
and the slow speed mortar rotates in the opposite direction,
automatically grinding the coarse particles by rolling.
4. The grinding time can be set automatically according to the
needs. In order to achieve the required powder fineness, it can be
grinded repeatedly for a long time or many times.
Spec Chart
|
Item |
Unit |
Parameter |
|
Diameter of mortar |
mm |
**0 |
| Depth
of mortar |
mm |
*0 |
|
Speed of grinding rod |
rpm |
**0 |
|
Rotation speed of the mortar |
rpm |
*0 |
|
Power of grinding rod |
w |
*0 |
| Power
of mortar |
w |
*0 |
|
Mortar material |
/ |
High alumina ceramics(corundum) |
|
Material of grinding rod(pestle) |
/ |
High
alumina ceramics(corundum) |
|
Length *width * height |
mm |
**0***0***0 |
|
Weight |
kg |
*2 |
|
Voltage |
v |
**0 |
| Can
the running time be set? |
/ |
Yes |
Â
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
SHANGHAI |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
T/T, L/C |
| Groupe de produits : |
grinding mill
|
