Prix FOB
Obtenir le dernier prix1000 ~ 1050 USD / Piece ( Negotiable )
|1 Piece Minimum Order
Pays:
Poland
N ° de modèle:
-
Prix FOB:
1000 ~ 1050 USD / Piece ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
1000 per Piece
Commande minimale:
1 Piece
Packaging Detail:
-
Heure de livraison:
3 to 6 days
Capacité de Fournir:
50 Piece per Week
Payment Type:
Western Union, PayPal
Groupe de produits :
Poland
Personne àcontacter Tom
Warsaw, Mazovia
The Turbodecoder for VAG-Group HU*6Â locks is a new generation
tool which will allow you to open and ignite your car in few
seconds time, without damaging the lock. Thanks to this tool you
will be also able to read the lock code and reproduce the key
in case you lost it.
It works with the following VAG-Group cars for:
VW, Audi, Skoda,
Seat, PorscheÂ
VW models from ***1
to currentÂ
Audi models from ***6
to currentÂ
Seat models from ***1
to currentÂ
Skoda models from ***1
to currentÂ
Porsche models from
***1 to current
How to use the Turbodecoder:
1 Setting up the Turbodecoder
- close the gate wheel
- turn the line (tension wheel) next to the point (gate
wheel)
- open the gate wheel
- rise the pins open to the maximum position
- close the gate wheel
2 Checking the generation of the lock by using the Keytester in
order to later put in the decoder with the proper sideÂ
- we put the keytester in the lock: if it stops on nothing you
just reverse the key, then if it stops on green it means that the
lock is second generation type. If it stops on red it means that
it is a first generation lock. After correct putting it in, check
the direction of the points.
3 Putting the Turbodecoder in
- we put the Turbodecoder in with a closed gate, and holding the
gate wheel with points directed to the same side as the keytester
pointed.
4 Starting to open the lock
- turn to the right (turbo wheel)
- close the gate wheel
- holding the gate wheel put the turbodecoder into the lock while
opening VAG group car locks first make **3 empty pumps: holding
the tension wheel turn turbo wheel maximum to the right and then
maximum to the left. Repeat it **3 times
- turn the turbo wheel right and open the center gate wheel
- make a tension left (turn the tension wheel left) and turn the
turbo wheel on line number 1 (turn the turbo wheel to the first
line on the gate) and return the turbo wheel right and juggle a
little bit
- make a tension right (turn the tension wheel right) and turn
the turbo wheel on line number 1 (turn the turbo wheel to the
first line on the gate) and return the turbo wheel right and
juggle a little bit and conversely repeat it **5 times from **1,
**1, **1, **1 then **2, **2, **2, **2, and progressively so on,
until you open the lock
- when the turbodecoder is turned to the open position stay in
this position and turn the turbo wheel to the point on the gate
wheel
- juggle a little bit
- turn to the other side
- juggle a little bit
5 Taking the turbodecoder out
- put the line (turbo wheel) next to the point (gate wheel)
- moving the gate wheel up and down push the gate at the same
time until you close it
- turn to the right (turbo wheel)
- holding the tension wheel extract the tool
6 Reading the code
- open the gate wheel
- turn the line (turbo wheel) next to the point (gate wheel)
- check the pin depths on the tool and write them down on a piece
of paper
All information on the use and handling this product are contained in the rules, which the buyer is obliged to acknowledge that he is familiarwith their content and accept them before purchasing.
| Pays: | Poland |
| N ° de modèle: | - |
| Prix FOB: | 1000 ~ 1050 / Piece ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 1000 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | - |
| Heure de livraison: | 3 to 6 days |
| Capacité de Fournir: | 50 Piece per Week |
| Payment Type: | Western Union, PayPal |
| Groupe de produits : | locksmith tools |
