Test bench MSG MS002 COM for diagnostics of 12 V and 24 V alternators through load simulation of current consumers up to 200 A or 100 A, correspondingly

La description

Test bench MSG MS**2 COM is used for diagnostics of *2 V and *4 V alternators through load simulation of current consumers up to **0 A or **0 A, correspondingly. The equipment tests voltage regulators with detection of errors in COM protocols in mode of idle running.



Weight, kg **5

Dimensions, mm **0***0****0 T

erminals of tested regulators COM, P-D, DFM, D+, RLO, C, SIG

Ampere meter accuracy, A 0,1

Belt type V belt/Poly-V belt

Voltage regulator total check, sec *0

Tested parameters of voltage regulators Stabilizing voltage; current rotor winding; COM voltage regulators: protocol; speed of exchange; type of regulator; errors

Short circuit protection Yes

Power of tested starters, kW Up to 6

Measured parameters Voltage; alternating current; continuous current

Voltage of tested electromagnetic valves, V *2/*4

Drive power, kW 5,5

Resistance of simulated rotor winding (for *2V/for *4V), ohm 5 / *0

Read parameters of units Voltage; alternating current; continuous current; drive rotation; COM voltage regulators: protocol; speed of exchange; type of regulator; errors

Voltage meter accuracy, V 0,1

Short circuit sound alert Yes

Transmission type (drive/alternator) Belt

Drive rotation direction Left/right

Drive rotation adjustment Smoothly

Voltage of tested starters, V *2/*4

Load adjustment Smoothly Load, A *2V - up to **0A, *4V - up to **0A

Alternator connection terminals COM, P-D, DFM, D+, RLO, C, SIG, F/*7

Battery model Any, up to *0 AHr

Supply type Three-phase

Voltage of tested alternators, V *2/*4

Supply voltage, V **0±*0%

Drive rotation, rpm *****0