Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
1450
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
with Vacuum-packed and wooden case packing.
Heure de livraison:
90 days
Capacité de Fournir:
100 Set per Year
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter Flora huang
Hubei
The feature of Tension
Leveler
Tension leveler is an equipment that produces plastic extension of
strip under the combined action of tension and continuous
alternating bending, so as to obtain better correction effect. Two
tension rollers are equipped on the inlet and outlet sides of the
roll straightening unit to make the tension stable and reduce
fluctuation, the tension of strip is amplified under the action of
the tension roller group, the straightening unit is in the form of
two rows of bending straightening components and balancing roller
device, the strip is subjected to alternating deformation in the
bending deformation zone of the first stage, so that the residual
deformation of each part of the strip is evenly distributed, the
residual deformation disappears in the second stage of
straightening, so that various three-dimensional shape defects are
corrected and mechanical properties of the strip are
improved.
The use of tension
leveler
Tension leveler is used to
eliminate all kinds of three-dimensional plate shape defects such
as bilateral wave, unilateral wave, middle wave, two-rib wave,
warping, buckling and potential bad plate shape.
In the process of calendaring
strip, the above-mentioned plate shape defects will be occurred in
the coiled strip due to bad roll shape and roll gap shape. These
defects are caused by the uneven longitudinal extension of the
rolled piece in width direction and the disorder of rolling stress.
In order to eliminate the bad shape of the coiled strip and make
the internal stress tend to be uniform, the coiled strip needs to
be corrected.
Scope of supply
Mechanical part: Main machine
and roll change device of double bending and
double straightening machine (excl.
anchor bolt, valve table and guide
rail);
Electrical part:the electrical
wiring on the host is connected to the junction box of the
host;
Hydraulic part:
Include only the hydraulic pipe,
and leave the interface on
the transmission side;
Packing
with Vacuum-packed and wooden case
packing.
Â
| Pays: | China |
| N ° de modèle: | 1450 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | with Vacuum-packed and wooden case packing. |
| Heure de livraison: | 90 days |
| Capacité de Fournir: | 100 Set per Year |
| Payment Type: | T/T, L/C |
| Groupe de produits : | machines |
