La description

Description

The T**2 is a micro-processor controlled reflow oven. The device is powered by standard **0VAC *0/*0HZ (**0VAC Model is available). User interface is implemented by way of T**2 keys and an LCD display. Pre-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.

This self-contained reflow station allows safe soldering techniques and the manipulation of SMD,BAG and other small electronic parts mounted on a PCB assembly. The T**2 may be used to automatically “re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.

A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.

The T**2 is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles.

Main Features
Ø The T**2 is a self-contained Micro-Processor controlled IC Heater and solder rework station.

Ø Uses up to **0 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large **0×**5mm area.

Ø Parameters of Eight (8) Soldering cycles are Pre-Defined

Ø Soldering cycles are keypad selected and progress displayed on the T**2 LCD.

Ø A single windowed drawer holds assemblies within the heating chamber

Ø The T**2 design is ergonomic, practical and easily operated.


Ø The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down.

Ø The T**2 design is ergonomic, practical and easily operated.

Ø The T**2 is an economical rework solution from single runs to on-demand small batch production.

Ø Light weight and a small footprint allows the T**2 to be easily bench positioned transported or stored.

Ø The T**2 can solder most bosseyed or double-face PCB boards small parts, ie.:
CHIPSOPPLCCQFPBGA etc; Can be used to the gum of the product solid, turning the circuit board hot aging, maintaining the PCB board and so on. Be satisfied to the needs of academe, smallorder run and extensively development of enterprise & company

Technical Parameters
Supply Voltage AC**0V/ *0Hz AC**0V /*2Hz
Putout Power **0W
Maximum Soldering Area **0×**5 mm
Temperature Range ******0
Cycle Time *8 min



Parts Inventory
Description Quantity Illustration
T**2 Main Assembly 1
Power Cable
**0VAC or **0VAC 1
5mm Fuse, *0A **0VAC
Fast Blow (Spare) 1
This Manual on CD 1