Product description/ PRODUCT
The fibers, **0/**0μm, are positioned in a loose tube made of a
high modulus plastic. The tubes are filled with a water-resistant
filling compound. A steel wire, sometimes sheathed with
polyethylene (PE) for cable with high fiber count, locates in the
center of core as a metallic strength member. Tubes (and fillers)
are stranded around the strength member into a compact and circular
cable core. An Aluminum Polyethylene Laminate (APL) is applied
around the cable core. which is filled with the filling compound to
protect it from water ingress. Then the cable core is covered with
a thin PE inner sheath. After the PSP is longitudinally applied
over the inner sheath, the cable is completed with a PE outer
sheath.
Product Features/ PRODUCT
· Good mechanical and temperature performanceÂ
· High strength loose tube that is hydrolysis
resistant Â
· Special tube filling compound ensure a critical protection of
fiberÂ
· PE sheath protects cable from ultraviolet radiationÂ
· Good crush ability,applies for duct and directly buried
applicationÂ
· To assure the water-proof function by:Â
  ·Single steel wire as central strength
memberÂ
  ·Special tube filling compound ensure a critical
protection of fiberÂ
  ·Fully filled in the cableÂ
  ·Double APL layers prevent the moistureÂ
  ·Good water-blocking tape prevent the sinking
vertically
Â
Product Standard / PRODUCT
·GYTA*3 cable complies with Standard YD/T *******9 as well as IEC
******1.
Optical Characteristics / PRODUCT
Â
G.**2
G.**5
*0/**5μm
*2.5/**5μm
Attenuation
   (**0ºC)
        */*
*@********************d>
