Prix FOB
Obtenir le dernier prix( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
todaymachine
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
plywood crate package
Heure de livraison:
7 days
Capacité de Fournir:
200 Set per Month
Payment Type:
T/T, Western Union
Groupe de produits :
-
Personne àcontacter Ms. Paige
todaymachine.com, Shantou, Guangdong
Model: TD**0
Product details and matters needing attention:
The connecting shaft and motor shaft connected directly, when motor starts running, drive the connecting shaft and a set of working on the connection shaft of the mill. For material from the hopper into the grinding powder, mill spindle and grinding sets of relative operation, ground into small pieces of material particle crushing force;After ground spiral motion of small particles in the mill was brought into the two piece of grinding, grinding indented relative to the operation, make the material in a short period of time were shattered into tiny particles (powder); Powder from grinding tooth ditch and thrown around .At the same time being loaded on the mill powder plate down, flowing from powder outlet.
Â
Technical parameters:
|
Electric pressure |
motor power |
motor speed |
Final fineness |
Production capacity |
Overall size |
weight: |
|
**0V/*0HZ **0V/*0HZ |
2.2KW Â |
***0r/min  |
*****0 mesh  |
*0 - *0 kg/h  |
**0***0***0 (mm) |
*0Â kg |
operation and adjustment:
1.Mill should be placed at the levels of fixed, robust
desktop or table, solid wood is better. Iron plate under the
bottom of motor with four screw holes. motor iron plate with
long screw through the screw holes firmly fixed on the
desktop or table ; It is more better if fix rubber mat
between motor and desktop, which can reduce vibration,
achieve better mute effect.
2.motor cover should be fixed on the desktop ,make the motor
cover and plate separate,to prevent the vibration and
resonance between iron plate and motor , then tighten motor
cover by short screw.
3.open the cover, then put millsone fix on the connection
shaft , pressing with two thumbs on the mill , if the mill
can free stretch,that proof mill and connecting shaft
cooperate well. Colse the cover ,tighten screw , check the
power supply, turn on the switch, check whether the mill
Operation specified direction,sound,shake is running normal .
if there is any abnormal sound or vibration, should shutdown
check, until returned to normal, can be restarted.
4.Open the mains,work about 1minutes, put material into
chute. Twist regulator to appropriate location. open blanking
baffle,material can slowly flowing to grinding chamber.
damper to open a little bit small, Â To avoid feed
fast,jammed motor.Generally speaking ordinary materials needs
grinding two times, one is Coarse grinding, another is fine
grinding.
5.milling thickness can adjustment by yourself ,which is
depends on clearance between two pieces of grinding, the
grinding of the clearance by regulator to control, according
to order the thickness on the cover, when the regulator to
the direction of the fine adjustment, two grinding gap
narrowed, flour is thinner;Otherwise the grinding powder
coarsening.
6.strength of regulator adjusting range and how to control,
can through the ears to hear the sound of abrasive disc
friction and the voice of the motor running, grinding, the
more closer louder voice and even sharper; Conversely,
grinding or not closer separation, voice is soft.
7.separate grinding is particularly high oil content of the
material such as sesame seed, walnut, peanut, oil content is
extremely high,so this kind of material can only be grinding
coarse , because these material has a large number of oil
filters through, will make powder slurry. So grinding
materials particularly high oil content, governor don't
adjust too tight, mill piece clearance stay somewhat close to
or even completely separate, can be ground into powder
(granule). Above material if need to wear very thin, need
material with no oily or low oil content, high oil content
and low oil content the proportion of the material as
follows: 1:1:4 to 5, and take the ground twice, the first
time, coarse grinding, fine grinding.
8.Install about Static grinding and dynamic grinding:
Dynamic grinding assemble in millstone ,Static grinding
assemble in crush cavity. will be fixed grinding three screws
removed, the grinding can be unloaded. The hardness of
grinding is made of cast iron, cast iron is about *2 °, the
hardness, flexibility is poor. With mill, screw can not be
screwed too tight, in case of grinding fracture.
Â
Â
Notices:
1. Must external circuit protection, overload protection
device, in order to protect the machine and personal
safety.
2.This machine is only can grinding dry material , the more
dry material , the more fineness.
3.Needs to be fixed in a solid level of the desktop and on
the counter, the most reduce vibration and noise.
4.In the process of machining, such as suddenly shut down by
power outages and other reasons, must be clean-up residual
material in the crushing cavity, then start again.
5.After the machine start ,should manufacture material until
run faultlessly.notice the feed rate to prevent motor
overload.
6.Machine after each use, Â should be clean inside, dry
and ventilated.
7.If Machine not to work, should cut off power supply. Keep
upright and don't put weight on it.
8.One full years’ warranty and lifetime maintenance service:
any problem caused by the equipment itself in the first two
years after purchase, new spare parts will be provided
freely. After that, spare parts will be supplied with cost
price.
| Pays: | China |
| N ° de modèle: | todaymachine |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | plywood crate package |
| Heure de livraison: | 7 days |
| Capacité de Fournir: | 200 Set per Month |
| Payment Type: | T/T, Western Union |
| Groupe de produits : | - |
