Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
carton
Heure de livraison:
15 days
Capacité de Fournir:
5000 Set per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Ms. libby
Zhejiang, Hangzhou, Zhejiang
split pressurized solar water heater
The split solar water heating system is such a system that separates the heat collector from the water tank, and transfers the solar energy collected by the heat collector to the water tank through the natural or forced cycle of medium to make water hot.
Â
 Characteristics
1.The
heat collector and  water tank are separated, and the system
works under pressure.
2.Intelligent controller to assure the system runs
automatically.
3.The storage water tank could be placed in any place of the room.
4.The solar collector could placed anywhere such as the balcony, southern wall, sliding roof, etc.
5.The water tank is placed indoors and it is in favor of reducing the heat loss of water tank.
6. You can have hot water *4 hours per day.
Â
Components:
1. Heat pipe solar collector (solar thermal collector)
2. Pressurized storage tank, Water tank capacity: **0 L;**0L; **0L; **0L; **0L; **0L; **0L; **0L; **0L
3. Working station
Â
Heat Pipe vacuum tubes Brief Indtroduction    Â
Evacuated tube with copper pipe, and there is anti-freeze liquid inside as medium transfering heat.
 1. Diameter and length: *8mm / ***0mm
 2. Glass material: Borosilicate glass 3.3
 3. Tube thickness: 1.6mm or 2.0mm
 4. Resistant hail: *5mm or *8mm
 5. Life span: *5 years to *0 years
Â
Heat pipe solar collector brief informationÂ
1.vacuum tube size: *8****0
2. stand frame:quality galvanized steel                         Â
3.insulation layer:polyurethane foam *5mm thickness
4.quantity of heat pipe tubes in a collector: from *0 pieces to *0 piecesÂ
5.working pressure:0.6Mpa
6.life span: *5 to *0 years
Pressurized storage tank brief introduction
1.inner tank:1.5mm SUS****2B stainless steel                                    Â
2.outer tank:0.5mm color steel                  Â
3.copper coil heat exchanger: red copper diameter *2mm        Â
4.insulation layer:polyurethane foam       Â
5.rated pressure:0.7Mpa                   Â
6.accessories: T/P valve, Mg anode, electric heater
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | carton |
| Heure de livraison: | 15 days |
| Capacité de Fournir: | 5000 Set per Month |
| Payment Type: | T/T |
| Groupe de produits : | Split pressurized solar water heater |
