Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
JP
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
standard packaging
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
-
Personne àcontacter Ms. Victoria
No. 135 Guonian Road, Yangpu Disstrict, Shanghai, Shanghai
I Technical Specification
1. Operation controlling mode: Manual/full automatic
2. Heating mode: Oil-heating
3. Temperature control: PID intelligent temperature control
4. Temperature uniformity in working area: ≤ ± 1.5 Celsius
5. Temperature control accuracy: ≤ ± Celsius
6. Temperature control range: *0 Celsius***0 Celsius
7. Pumping speed: *0L/s
8. Laminating time: **8mins (excluding curing time)
9. Operating vacuum degree: *****0PA
*0. Exhausting time: **6 mins
II Application features:
Both one-time laminating and curing and three times laminating
and curing are workable. The equipment of module production has
high compatibility.
III Performance features:
1. intelligent temperature control system makes the temperature
more homogeneous and easier to set and control.
2. Laminating pressure is adjustable and can be adjusted
according to the process, which makes the quality of modules
better.
3. It could work continuously in high temperature for *4
hours.
4. The advanced touch screen operating platform makes it more
intuitive to operate, makes it respond more quickly, make the
performance more stable and the failure rate is further
reduced.
5. Applying a fully humanized operating procedure. The equipment
is equipped with many detection switches. In the normal
production, operators will only be required to put the modules on
the heating platform and press the cover switch. The equipment
will automatically laminate, cure and open cover automatically
and wait for operator to start the next procedure.
7. Three-level linkage structure is compact and the belt
structure is applied for the ting and outputting to ensure
the smoothness of the modules to be laminated.
IV Structure features:
1. Upper flange structure. The upper flange fixed flock on the
machine could make it easy to fix the upper flange fix on the
corresponding installation position and replace the rubber
plate.
2. The seal ring is placed overhead to extend the service
life.
3. Power arm balancing and lifting structure makes the opening
and closing of upper room more stable and safer.
4. Anti-fold structure of the rubber plate could extend the
service life of the rubber plate.
5. Use finishing thick steel plate as heating platform. In the
lower part of this platform a full closed oil circulation system
is adopted which ensures the uniformity and controllability of
temperature when packaging the components.
6. Using exposed upper flange fixing bolt which makes it
convenient to replace rubber plate.
V Main components
1. Control relay: Schneider
2. Temperature control module: Delta
3. Programmable controllers: Germany Siemens
4. Pneumatic components: Taiwan AIRTEC
5. Vacuum Pump: Sichuan Huaxin
6. Touch screen: Delta
VI Safety assurance:
1. Setting hydraulic pressure safety lock. When the power is down
suddenly or the cover is opened in place, the top cover will
automatically lock in the current position and not fall, which
ensure the safety of operator.
2. Setting emergency switches. Pressing it when the
accident happens. The laminator will cut off the main power
supply and top cover will remain in situ. Guaranteeing that the
accident has been solved and treated.
3. Alarm system: Setting oil starvation alarm, over-temperature
alarm, up-vacuum alarm, Uncaps the undervoltage malfunctionalarm,
the vacuum pump malfunctionalarm, the heating malfunctionalarm,
the temperature measurement module malfunctionalarm, illegal
operation malfunctionalarm, totally eight sets of warning device
to ensure the accuracy and normal of working state and increase
finished product yield.
4. Setting emergency opening device. When power off suddenly, the
top cover of laminator can be opened and the components can be
taken out and reprocessed, which solved the problem that the
components couldn’t be processed in time and become scrap because
of power down for a long time.Â
| Pays: | China |
| N ° de modèle: | JP |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | standard packaging |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | - |
