Prix FOB
Obtenir le dernier prix10000 ~ 60000 USD / ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
MDS312
Prix FOB:
10000 ~ 60000 USD / ( Negotiable )Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
10000
Commande minimale:
1 Set
Packaging Detail:
wood packing
Heure de livraison:
15 to 20 days
Capacité de Fournir:
100 Set per Week
Payment Type:
L/C
Groupe de produits :
Personne àcontacter LV
Shanghai, Shanghai
Brief
 introduction
Multi-Disk Screw Press( Hereinafter referred
as MDS ) belongs to the screw press, it's clog-free and can reduce
the sedimentation tank and sludge thickening tank, saving the cost
of sewage plant construction. MDS using screw and the moving rings
to clean itself as clog-free structure, and controlled by the PLC
automatically, it's a new technology that can replace the
traditional filter press like belt press and frame press, the screw
speed is very low, so it cost low power and water consumption in
contrast to the centrifuge, it is a cutting edge sludge dewatering
machine.
The
Sludge Dewatering Press is an enclosed high performance sludge
dewatering system. It utilizes a central screw auger and a slowly
oscillating multi-disk filter to gradually increase pressure on
flocculated sludge to produce an exceptionally dry sludge cake.
With electrical, water and polymer usage, and high capture rates
the system is very cost effective.
Â
The
Sludge Dewatering Press can be provided with all equipment required
for dewatering included and factory mounted, piped and wired on a
single stainless steel skid. This equipment includes the sludge
pump, wash water pump, polymer dosing system and control panel. The
system features fully automated one push startup and
shutdown. Once started up the system can run unattended and can be
set to shutdown automatically with no operator
intervention.
Â
                                         Structure
Principle
Â
Layers of the spacers, which are Fixed and
Moving Rings, are secured in place by a tie rod. The inner
diameters of the Moving Rings are slightly smaller than the outer
diameter of the screw and their rings. Mobilized by the screw, it
continuously cleans the sludge out of the gaps, therefore,
preventing clogging.
Â
                                        Dewatering
Principle
Â
The
initial section of dewatering drum is the Thickening Zone, where
the solid-liquid separating process takes place and where the
filtrate will also be discharged. The pitch of the screw and the
gaps between the rings decrease at the end of dewatering drum,
hence increasing its internal pressure. At the end, the End Plate
further increases the pressure, so as to discharge dry sludge
cake.Â
Â
Â
Application
1)Â Municipal
water and wastewater treatment plants
2)
Agricultural/fishery community wastewater treatment
plants
3)
Industrial waste treatment plants
4)
Food/beverage production plants
5)
Dairy farming/Meat processing plants
6)
Chemicals manufacturing plants
7)
Machinery manufacturing/Metal processing
plants
8)
Laundry wastewater
9)
Other (paper manufacturing, building material
manufacturing, oilfield
associated water accompanied with crude oil mining, etc.
)
Â
Advantages
Â
Pays: | China |
N ° de modèle: | MDS312 |
Prix FOB: | 10000 ~ 60000 / ( Negotiable ) Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | 10000 |
Commande minimale: | 1 Set |
Packaging Detail: | wood packing |
Heure de livraison: | 15 to 20 days |
Capacité de Fournir: | 100 Set per Week |
Payment Type: | L/C |
Groupe de produits : | MDS |