Slab formwrok

La description

General Introduction:
Aluminium Flying Table Form System is a mechanized formwork system using special aluminum alloy section assembled and put together using only bolts and nuts. It can be stripped and re-assembled to suit any concrete structure required, especially for frame structure. It is mainly designed to shore variable soffit heights and fly in one piece to the next floor.
Basic information:
Weight:****5kg/ m2
Height: adjustable
 Length:2.4m-any length.
Load capacity:**0mm slab thickness
Material:Aluminium alloy ****-T6
Product Advantages:
1. Reduce lifting cost since it is lightweight.
2. Large panels can be set up to *5m2 for one table,which could reduce the quantity of fillers, minimize decking joints and eliminated a large amount of material wastage from cutting. Thus, quicker the floor cycles.
3. The degree of pre-engineering and inherent simplicity of the system enables unskilled local labor to use. Only **8 worker could safely strip, lift and reset over **0m2 of formwork in *5 minutes.
4. The entirely stripping reduce the wastage of plywood and comparatively increase its life-span. Besides, there is no need of lump wood. And therefore it is much more environmental protection and energy saving.
5. The whole system could be stripped and lifted together and this improves the efficiency and also saves the labor cost
6. High recovery values for the used materials.
7. Materials versatile to our other systems.