Prix FOB
Obtenir le dernier prix|
2000 Square Meter Minimum Order
Pays:
China
N ° de modèle:
Thickness:1.2mm, 1.5mm, 2.0mm
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
2000 Square Meter
Packaging Detail:
PE bag outer package; paper tube inner package
Heure de livraison:
5days
Capacité de Fournir:
10000 Square Meter per Day
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter Ms. honeer
Futian Free Trade Zone, Shenzhen
Easy-ato-use for constructors, help you cut your cost
dramatically
Application:
It is waterproofing membrane with high performance for application
on foundation walls, plaza decks, basements, green roofs, inverted
roofs and steep-slope roofs.
Advantages:
Easy to handle and apply.
Cold applied**- no torch required, eliminates fire hazard.
Flexible**- accommodates minor settlement and shrinkage
movement.
Self-sealing**- full continuity at overlaps, rubber/bitumen
formulation allows self-healing of small punctures.
Dual release liner**- keeps the surface of the membrane from
contamination.
Can be Wet-applied or dry-applied**- originally adhered to watered or green concrete substrate with cement grout in place of primers, so it is quick and convenient to install and safe for site workers, occupants and the environment.
Available size:
Width: 1m*2m
Length: *5m**0m
Thickness: 1.0mm*2.0mm
"Wet-application"procedure:
The wet-application is different from traditional dry-application,
it is very unique, which features the use of cement in place of
primer; The method enables the installation to be continued on wet
or even rainy days. Thus the time can be shortened drastically and
less requirements on substrates can help cutting down the relevant
costs.
Steps:
1. Clean substrate ensuring it is reasonably smooth and free from
sharp protrusions, hollows, dust and dirt.
Spray some water to wet substrate, but should remove the
pool-collected water
2. Plaster cement grout within the scope where membrane will be
installed. (Plaster cement mortar in a largearea at one time is not
recommended, its better to plaster cement mortar while the membrane
is being installed).
The thickness of cement mortar shall be determined according to the
smoothness of substrates, which is about **5mm in general.
3. Pull off release paper and adhere membranes onto the fresh
cement mortar.
4. Join side laps (overlap) by adhering membranes with each other
(minimum width of overlap area is *0mm)
NOTE: When membranes installation are completed, do not move or
walk on them, the strongest and overall adhesion can be realized
after about *8 hours (When the cement mortar become cured, the
exact curing time depends on climate)
5. Press membranes tightly to make sure the trapped air is
excluded
Details treatment including inner/outer corners, pipes, chimneys
and others should be done as per appropriate requirements.
Pays: | China |
N ° de modèle: | Thickness:1.2mm, 1.5mm, 2.0mm |
Prix FOB: | Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | 2000 Square Meter |
Packaging Detail: | PE bag outer package; paper tube inner package |
Heure de livraison: | 5days |
Capacité de Fournir: | 10000 Square Meter per Day |
Payment Type: | T/T, L/C |
Groupe de produits : | - |