Prix FOB
Obtenir le dernier prix6.21 ~ 7.88 / Kilogram
|50 Kilogram Minimum Order
Pays:
China
N ° de modèle:
DH-R4525
Prix FOB:
6.21 ~ 7.88 / Kilogram Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
6.21 per Kilogram
Commande minimale:
50 Kilogram
Packaging Detail:
28 / 200 kg drum packing
Heure de livraison:
within 6days after getting your bank receipt
Capacité de Fournir:
6 Ton per Day
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Ms. caroline
hongqi street, Shijiazhuang, Hebei
Production ofresin
craftsmold:
1.Clean themaster pattern and
drying in air, forsmoothprocessing(To
play with a layer of mold release wax or brushing again release
agent) forsmoothprocessing(To
play with a layer of mold release wax or brushing again release
agent)
2. *******0 grams of
silicon rubber mold into plastic pots
spare;
3. Added to the vessel for mixing the hardener at a
weight ratio (typically 1.**2.5%) weighed and sufficiently stirred
to uniformity;
4 As the case (especially the first layer) adding
a certain amount of silicone diluents.Until blended, generally 3 to 5
minutes.
5 silicone rubber
mold and curing agent mixed, reaction was carried out at room temperature, and
the release of a low molecular weight alcohol, Alcohol molecules
from colloidal required under negative pressure discharge bulbs **3
minutes.
6 the multilayer brushing piece mold, should
follow the inner, middle and outer curing
appropriate.Dosage of curing
agent is relatively small, longer reaction time, reaction, colloid,
so the best dosage of curing agent is less in more,
to be the first layer dry and
then brush when brushing second layer.The operating
time of ****0 minutes, the removal time of ****5 hours, Curing time
of *4 hours,
7 the three-dimensional perfusion model, generally
*0 to *5 hours curing. 8 Even after the completion of the soft mold
making production of gypsum or glass fiber reinforced plastic
jacket to support soft silicone
mold.
In addition, please pay special
attention to the mold division in the
production of silicone rubber mold is important to note first layer
must brush the mold, the deployment of the first layer of silicone
material appropriate to reduce the proportion of hardener,
appropriate to extend the fixed time in order to minimize the
generation of bubbles .
Remak
Our
factory all mould are made from high quality silicone rubber after
*8 working procedure
| Pays: | China |
| N ° de modèle: | DH-R4525 |
| Prix FOB: | 6.21 ~ 7.88 / Kilogram Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 6.21 per Kilogram |
| Commande minimale: | 50 Kilogram |
| Packaging Detail: | 28 / 200 kg drum packing |
| Heure de livraison: | within 6days after getting your bank receipt |
| Capacité de Fournir: | 6 Ton per Day |
| Payment Type: | L/C, T/T |
| Groupe de produits : | silicone rubber |
