Prix FOB
Obtenir le dernier prix|
1 Minimum Order
Pays:
China
N ° de modèle:
DCJ
Prix FOB:
Localité:
GUANGZHOU
Prix de commande minimale:
-
Commande minimale:
1
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Ms. leafy
106national road, guangzhou, guangdong
The machine is controlled by an servo control system, which helps increase dynamic response and torque density to the highest level and which replaces the tradition mode of driving that may adopt a hydraulic, dc, stepping, or frequency control mechanism. Such a configuration enables the system to have a shorter cycle, a higher production rate, better reliability and a longer service life. The entire servo system consists of a servo driver, a servomotor, an encoder and a load, which together run in one control closed-loop system. Within the system, the driver receives information from the outside, and then transmits it to the servomoter, which converts the current into a torque and then passes it on to the load. Upon receipt of the torque, the load acts or accelerates or decelerates or decelerates automatically, depending on its own characteristics. The encoder measures the position of the servomoter and feeds the signal generated back to the driver. Furthermore, the encoder is a high-precision controller and can transmit modified values to the servo driver automatically, whereas the driver retroacts the set values. The entire system functions as a high-responsive closed-loop system. The DCM silica gel injection machine can save electricity by ****0%, depending on the specific type of product. Normally, the thicker the glue layer of a product and the longer the cooling time, the less the electricity required. 1. quicker response and higher precision. 2. a shorter forming cycle and higher efficiency 3. lower energy consumption on the part of the motor 4. the current generated when starting a conventional motor is generally 5 times as high as that maintained when in normal operation. Because a DCM machine adopts soft start, it will not cause impact to the power grid; 5. more water and oil-efficient 6. lower noise 7. a shorter machine body 8. a higher cost-performance ratio
| Pays: | China |
| N ° de modèle: | DCJ |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | GUANGZHOU |
| Prix de commande minimale: | - |
| Commande minimale: | 1 |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
