silicone grease for domestic appliance with high thermal conduction By Guangzhou Usilicone chemical materi,
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
product
Prev
silicone grease for domestic appliance with high thermal conduction silicone grease for domestic appliance with high thermal conduction
Next

silicone grease for domestic appliance with high thermal conduction

6 ~ 12 / Piece ( Negotiable )

|

1 Piece Minimum Order

Pays:

China

N ° de modèle:

-

Prix FOB:

6 ~ 12 / Piece ( Negotiable ) Obtenir le dernier prix

Localité:

-

Prix de commande minimale:

6 per Piece

Commande minimale:

1 Piece

Packaging Detail:

1 kg/tank

Heure de livraison:

In 7 days.

Capacité de Fournir:

10000 Kilogram per Day

Payment Type:

T/T

Groupe de produits :

Contacter maintenant
Membre gratuit

Personne à contacter Joe

Guangzhou, Guangdong

Contacter maintenant

Spécification du produit

La description

 

Appearance White Paste
Penetration **0~**0(1/*0mm, *5℃)
Specific Gravity 2.7~3.0
Oil Separation ≤1.0(%)(**0℃, 8h)
Volatile ≤1.0(%)(**0℃,8h)
Breakdown Voltage Strength ≥*0(kv/mm)
Volume Resistivity   ≥3×*0*4(Ω·CM)
Thermal Conductivity  3.**4.2(w/m.k) 

 

 1 kg/tank,*0kg/barrel,*0g/branch,**0g/branch.
 

 

METHOD OF OPERATION

INSTRUCTIONS

1,Clean surface: cleaning adhesion surface and to remove the rust,dust and greasy dirt, etc.

2,After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.

3,Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within *4 hours (at room temperature and *5% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.

 

MATTERS NEEDING ATTENTION

NOTE

 

After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.

SPECIFICATION TRANSPORT

STORAGE

1,6 months shelf life if stored below *5 ℃ in cool, dry place, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
2,These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.

Pays: China
N ° de modèle: -
Prix FOB: 6 ~ 12 / Piece ( Negotiable ) Obtenir le dernier prix
Localité: -
Prix de commande minimale: 6 per Piece
Commande minimale: 1 Piece
Packaging Detail: 1 kg/tank
Heure de livraison: In 7 days.
Capacité de Fournir: 10000 Kilogram per Day
Payment Type: T/T
Groupe de produits : RTV-1 Condensation Sealant

Mots-clés correspondants Guangzhou Usilicone chemical materi

Send a direct inquiry to this supplier

To:

Joe < Guangzhou Usilicone chemical materi >

Je veux savoir: