Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
Portugal
N ° de modèle:
concrete repair
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Helio
Martinela, Leiria
MORTAR FOR CONCRETE SURFACE REPAIR
Description
Mortar SIB R*0 is a product comprised of cement-based aggregates of
particle size selected high hardness and chemical additives and
thus represent a mortar with high resistance, ideal for repairing
surface industrial concrete floors.
Application fields
- Repair concrete super large areas indoors and outdoors;
- Repair cracks and minor irregularities;
- Repair of concrete with little resistance because of the rain
water when they are implemented;
- Leveling of small areas with little planimetry;
- Application in industrial areas subject to high wear.
- Garages, parking lots, factories, pedestrian zones, etc.
Application
Support:
The surface must be dry, rough, free of dust and other loose
particles.
Before applying the product, the substrate must be cleaned by
removing the covers of lacquer, oil, plastic, grease, and other
healing products.
For application of **3mm thick is recommended the application of
the primary SIBPRIMER A2, before applying the mortar. The primer
should dry **3 hours before application.
For thickness of 5 mm on porous surfaces we recommend the
application of primary SIBPRIMER C1, and the consequent imposition
of mortar in the system wet on wet "WET TO WET".
To support smooth, slightly porous, and heavy traffic areas, it is
recommended the application of the primary ITS primer, with the
addition of **9 loads ITS DRY SAND
Application
You should mix *5 kg of R*0 SIB, approximately 4 liters of water
until a smooth paste and pasty.
The mortar can be applied in a single layer or multilayer
system.
Each layer should have thickness greater than 5 mm. If applying for
more than one layer, the application of the 2nd layer should only
occur after drying of the 1st layer.
The mortar should be tight, and hand tooled finish.
In case of doubt, we recommend to perform some tests before
application.
Further processing
Under conditions of very high temperature, direct sunlight and
strong winds it is recommended the application of the product or
SIBAQUACURE SIBCURING healing in order to protect the mortar of his
premature dehydration and consequent cracking.
| Pays: | Portugal |
| N ° de modèle: | concrete repair |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
