Prix FOB
Obtenir le dernier prix1.85 ~ 2.1 / Ton
|5 Ton Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
1.85 ~ 2.1 / Ton Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
1.85 per Ton
Commande minimale:
5 Ton
Packaging Detail:
500kgs/pallet
Heure de livraison:
2week
Capacité de Fournir:
30000 Ton per Year
Payment Type:
T/T, L/C
Groupe de produits :
Personne à contacter Ms. amanda
No. 9 Qiaoqixiasheng Road, Xuxiake Town, Jiangyin City, Jiangsu Province, China, Wuxi, Jiangsu
Application
HJ0**1 is a cross-linkable
semi-conductive shielding compound, specially designed for
bonded conductor shielding compound of extrusion insulation
power cables rated voltage up to *5KV. It is suitable for dry
vulcanization processing method at high temperature. It provides
fine surface smoothness, nice extrusion flowability, good
performance to prevent scorch and stable volume
resistivity.
HJ***1 has excellent
compatibility with copper conductor, without copper-oxidation by
adding special accessory
ingredient.
Specifications
HJ***1 meets the applicable
requirements as below when processed using sound extrusion
practices and testing procedures.
-AEIC CS 7 and CS
8 -IEC
****0
-ICEA S******4/NEMA WC
7 -UL
***2
-IEC ****2
| Properties | Test Method | Unit | Typical Value |
| Physical Properties | |||
| Density, *3℃ | ASTM D***5 | g/cm³ | 1.*4 |
| Tensile Strength | ASTM D**8 | MPa | *2 |
| Elongation at Break | ASTM D**8 | % | **0 |
|
After Oven Aging, **8hrs at
**6℃ Tensile Strength Elongation at Break |
ASTM D**8 |
% % |
**0 *8 |
|
Hot Set Test, **0℃,0.2MPa,
*5min Elongation under Loading Permanent Deformation after Cooling |
IEC**0 |
% % |
*0 8 |
| Moisture Content | Karl Fisher | ppm | **0 |
| Brittleness Temperature | ASTM D**6 | ℃ | - *5 |
| Electrical Properties | |||
| DC Volume Resistivity at | ASTM D**1 | ||
|
*0℃ *0℃ |
Ω.cm Ω.cm |
*0 **0 |
|
â‘ Temperature Setting of
Extruder：
|
||||||||||||||||
|
â‘¡It is recommended to use
stainless steel wire filter
(*0×*0×*0). â‘¢The above temperature setting are the most typical ones. With different extruder devices, it can be adjusted in terms of the practical situation after extrusion in use, combining with melting pressure and current, in order to achieve the best extrusion result. |
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 1.85 ~ 2.1 / Ton Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 1.85 per Ton |
| Commande minimale: | 5 Ton |
| Packaging Detail: | 500kgs/pallet |
| Heure de livraison: | 2week |
| Capacité de Fournir: | 30000 Ton per Year |
| Payment Type: | T/T, L/C |
| Groupe de produits : | Cross-linkable compound for MV cable |
