Prix FOB
Obtenir le dernier prix2 ~ 5 / Square Meter ( Negotiable )
|500 Square Meter Minimum Order
Pays:
China
N ° de modèle:
YG-1
Prix FOB:
2 ~ 5 / Square Meter ( Negotiable ) Obtenir le dernier prix
Localité:
Weifang, China
Prix de commande minimale:
2 per Square Meter
Commande minimale:
500 Square Meter
Packaging Detail:
rolls in carton box
Heure de livraison:
14 days after the receipt of L/C
Capacité de Fournir:
10000 Square Meter per Day
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne à contacter Ms. Olivia
1302 A, Weifang, Shandong
Our company adopt the German technology, and the most advanced international formulations which is suitable for the manufacture of light steel structure waterproof anti-corrosion materials. This kind of membrane has the following characteristics, low cost, **2 times higher than the life of the steel structure itself, environmental materials to fill gaps in the domestic steel structure waterproofing.
Product description:
The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix. The surface is covered with polyethylene film, aluminum foil or fine sand, meanwhile, the base is covered with a release sheet. The product has a good self-adhesive and bending properties.
Application:
Construction is simple & clean and can be widely used in roofing, basement, bathroom, etc. For construction, it can be paved or sticked on pipe wall(except heat pipes), bridges and other complex environment. But it is prohibited to work in open flame or convert fire.
The detailed info.:
thickness:1mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.
reinforcement: polyester, fiberglass
width:1m or any width within 1m.
length:2.5m, 5m, *0m, *5m, *0m.
This product has the low-temperature resistance property. And it can be used in the metro, tunnels, fire scene. The property of moisture resistance and sealing materials makes it can be applied to pipeline waterproof & anti-corrosion works.
The product meets the industry standard JC *******9 “self-adhesive plastic bitumen waterproofing membrane”. The product meets the industry standard JC *******9 “self-adhesive plastic bitumen waterproofing membrane”. The main physical properties are listed as follows,
[Physical property]
| Thickness/mm | Width/m | Area/m2 |
| 1.2 | 1 | *0 |
| 1.5 | 1 | *0 |
| 2.0 | 1 | *5 |
| NO. | Property | Unit | surface material | ||
| PE | AL | N | |||
| 1 | Water impermeability | Pressure, M Pa≥ | 0.2 | 0.2 | 0.1 |
| Retention time, min≥ | **0, water impermeable | ||||
| 2 | Heat resistance°C | **- | *0 No slippage, flowing, dropping. | ||
| 3 | Tensile force N/*0mm≥ | **0 | **0 | ||
| 4 | Elongation at break,%≥ | **0 | **0 | **0 | |
| 5 | Softness | **0°C, Φ*0mm, 3s, **0°C, no crack. | **- | ||
|
Shear performance N/mm |
Between membranes≥ | 2.0 or fracture on the external agglutination section | fracture on the external agglutination section | ||
| Between membrane & aluminum plate≥ | |||||
| Peel strength, N/mm≥ | 1.5 or fracture on the external agglutination section | Fracture on the external agglutination section | |||
| Puncture resistance | water impermeable | ||||
| Aging by artificial climate | Appearance | No crack, no bubble. | **- | ||
| Tensile force retention percentage, % | *0 | **- | |||
| Softness at low temperature,°C | **0°C, Φ*0mm, 3s, **0°C, no crack. | **- | |||
| Pays: | China |
| N ° de modèle: | YG-1 |
| Prix FOB: | 2 ~ 5 / Square Meter ( Negotiable ) Obtenir le dernier prix |
| Localité: | Weifang, China |
| Prix de commande minimale: | 2 per Square Meter |
| Commande minimale: | 500 Square Meter |
| Packaging Detail: | rolls in carton box |
| Heure de livraison: | 14 days after the receipt of L/C |
| Capacité de Fournir: | 10000 Square Meter per Day |
| Payment Type: | T/T, L/C |
| Groupe de produits : | - |
