SBS modified asphalt root-resistant and waterproof roll membrane By Cangzhou Jiansheng Building Waterproof Material Co., Ltd.,

SpÃ©cification du produit

SBS modified asphalt root-resistant and waterproof roll membrane

Specification

Description	Width	Length	Thickness	Weight
Styrene butadiene styrene(SBS) modified bituminous sheet materials (PE)	1m	*0m	2mm	*8kg/roll
	1m	*0m	3mm	*1kg/roll
	1m	8m	4mm	*5kg/roll
Styrene butadiene styrene(SBS) modified bituminous sheet materials with mineral granules(M)	1m	*0m	3mm	*5kg/roll
	1m	8m	4mm	*7kg/roll
	1m	8m	5mm	*7kg/roll
Styrene butadiene styrene(SBS) modified bituminous sheet materials with aluminum foil(Al)	1m	*0m	2mm	*9kg/roll
	1m	*0m	3mm	*2kg/roll
	1m	8m	4mm	*6kg/roll
Self-adhering polymer modified bituminous waterproof sheet	1m	*5m	1.5mm	*5kg/roll
	1m	*0m	2.0mm	*6kg/roll
	1m	*0m	2.5mm	*2kg/roll
	1m	*0m	3.0mm	*8kg/roll

Technical capacity

NO.	Reinforcement		PY				G
	Type		I	II			I		II
1	Soluble Matters	2mm	-				***0g/m2
		3mm	***0g/m2
		4mm	***0g/m2
2	*Water tightness,0min,≥Mpa**		0.3					0.2	0.3
3	Heat resistance degree,°C,no glide, no flow, no drop		*0			**5		*0	**5
4	Tension, *N/0mm**	Longitudinal	**0			**0		**0	**0
		transverse						**0	**0
5	Elongation at break,≥	Longitudinal	*0%			*0%		-
		transverse
6	Brittleness point		**8°C			**5°C		**8°C	**5°C
7	Tearing strength,≥	Longitudinal	**0N			**0N		**0N	**0N
		transverse						**0N	**0N
8	Manual work and climate quicken aging	Appearance	No.1 degree (no glide, no flow, no drop)
		Longitudinal tensionkeeping rate,≥	*0
		Brittleness point	**0°C		**0°C			**0°C	**0°C
GB*****0

Product Characteristics

Good capacity of anti-aging, anti-acid, and anti-alkali, its service life is *0years.

High tensile strength and elongation which adapts to the contraction or crack of the base.

Good perdurable capacity to climate; be used in cold(**5°C)environment for long life.

Applied by torch.

Widely applied in roofing, basement, pool, subway etc.

Construction Requirements Basement Treatment

The waterproofing base should be strong smooth, and clean without particles on the surface.

No peeling or cracking shall exist on the surface. The corners of the base shall be made into arcs with

a radius of no less than *0mm or triangular. The drain slope, division seam, and air vent shall be carried

out and treated according to design requirements. Then brush promer on the foundation until it is dry.

Installation

Place the sheet correctly, fire torch, evenly heat the sheet and foundation ,When the surface of the sheet is

black and bright with a fusion layer apply the sheet and press it into a solid and flat state. Before the sheet

is cool, seal the edge of joints by float.

Cautions installation is forbidden during rain, snow, fog, strong wind.

The temperature should be ***5°C during installation.

All nodes should be reinforced during installation.

Keep away from fire during storage.

Pays:	China
N Â° de modÃ¨le:	a9
Prix FOB:	2.3 ~ 4.5 / Square Meter (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	2.3 per Square Meter
Commande minimale:	100 Roll
Packaging Detail:	Packed in rolls with pallets
Heure de livraison:	Within 10 days after receipt the 30%down payment o
Capacité de Fournir:	20000 Roll per Month
Payment Type:	L/C, T/T
Groupe de produits :	-