Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Ms. Jena
linqu, Weifang, Shandong
Sand Making Machine For Cone Crusher With High Quality
Introduction
     The machine is developed on the basis
of absorption of foreign advanced technologies in ***0s. It is
different from traditional cone crushers in designed structure and
adopt the main advantages of each traditional type so far. It is
suitable for fine crushing and superfine crushing hard rock, ores,
slag and refractory. Cone crusher is widely used in metallurgical
industry, construction industry, road building industry, chemical
industry and phosphate industry. It is also applies to hard and
medium hard ore and rock crushing operations such as iron ore,
copper ore, limestone, quartz, granite, basalt, diabase. Ore
crushing chamber is determined by the type of use: standard type
applied to medium crushing, medium one suitable for crushing and
the short head type is applied to ultra-fine crushing.
Sand Making Machine For Cone Crusher With High Quality Working
Principle
    Driven by the motor, hydraulic coupler,
small bevel gear drive the big bevel gear under the eccentric
sleeve to make the sleeve rotate in order to crushing materials.
The spindle don't rotate but to support and bear crushing force.
This kind of structure could bear great crushing force, thus is
very steady and is suitable for fine and super fine crushing
requirements. Cone crusher usually applied to the third or the
fourth stage of crushing operations. It is also suitable for
building materials and non metallic mines and civil engineering,
especially used in sand making operations.
Sand Making Machine For Cone Crusher With High
Quality Features
1, Increasing eccentricity, larger capacity;
2, Faster performance, increase of power and improvement
of  the crushing fineness;
3, Increased dynamic cone swing centers, optimizing chamber
design;
4, Thickening the scale board to prolong life extinction;
5, With the application of hydraulic motors to replace the
hydraulic pusher, mine discharge  mouth can be
continuously adjusted precisely, we can split the fixed cone
assembly in *0 minutes.
6, Large capacity, high content of ore powder.
7, High-strength materials is used in the key components, increased
weight properly, and better reliability.
Sand Making Machine For Cone Crusher With High Quality Features
1 , The movable cone rotates continuously, the crushing
process and discharge process run alternately along the working
surface, thus with high production .
 2, The material sandwiches between the two cones, suffering
extrusion, bending and shearing , easier crush and lower power
consumption .
 3, Even final product size , uniform wear surface.
4 , Simple structural. Cone crusher main components are as
follows: the horizontal axis , moving cone body, balance
wheel, eccentric bushing, upper broken wall (Â fixed cone ),
lower crushing wall (movable cone), hydraulic coupler, lubricating
systems, hydraulic systems, control systems and other parts.
5 , Both moving cone and fixed cone are upright. While dynamic
cone swing , in the crushing chamber near the discharge port
, there is a parallel gap between the moving cone and
fixed cone so that the finished product be uniform. Inlet size is
capable of handling the material that has been broken once.
6 , this series cone crusher adopts dry oil or water seals
sealing methods, dust and impurities can not get into the machine
, thus ensuring cleanness of lubrication oil and extending the
service life of sliding bearing and ball thrust bearing, making the
machine run reliably.
 Sand Making Machine For Cone Crusher With High Quality
Technical Parameter
1). Specifiction:
Name: Sand Making Machine For Cone Crusher With High Quality
Model: ZYS*6D
Max Feed size:<**0mm,Â
Output Size:***8mm,Â
Capacity: *****0TPHÂ Â
Power: **0KW
| Model | ZYS*6D |
| Motor Power | **0KW |
| Input Size | less than **0mm |
| Output Size | 6 to *8mm |
| Production Capacity | *0 to **0 TPH |
| Overall Size | ***6****6****0mm |
| Payment Terms |
1).*0% TT in advance and balance before loading. 2). LC at sight |
|
Delivery Time  |
About *0 days after received your deposit |
| Packing |
1). Export standard packing 2). Main Machine naked, spare aprts packed in steel case 3). According to your requests |
| Â Â Loading Port |
1). Qingdao Port 2). Shanghai Port 3). Tian jing Port |
|
Shandong Jiuchang Heavy Industry Technology Co.,Ltd No.**6 Quyang Road,Dongcheng Industry Zone Linqu,Weifang, Shandong, China    |
|
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
