Prix FOB
Obtenir le dernier prix11.5 ~ 762.5 /
|- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
11.5 ~ 762.5 / Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
11.5
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter He
Chengdu, Sichuan
No matter the yellow board or the blue board: the hanging height is
very important when trapping. When the plant is in the seedling,
the hanging height should be ****5cm higher than the seedling. When
the plant height is close to the trap plate, it should be ****5cm
higher with the plant height. If the height of the high-stalk crop
is 0.**1 m, the trap board should be hung between the rows, and the
height should be the same as that of the crop. This is beneficial
to close to plants and more effectively trap pests. There is also
an immediate method of catching insects. When the plant is tall and
luxuriant, and there are many pests, several insect traps can be
used to connect together. People stand between the rows of the
plant, one hand the insect trap, the other hand the small wooden
stick to vibrate the plant, while vibrating, while walking, you can
see that small pests like whitefly rush to the insect trap in one
direction like smoke, and the insect trap is filled with countless
pests in a few minutes, you can change a new insect trap and
repeat!
Reuse
The insect trap plate covered with small insects can be washed with
clean ball and water for **2 times, and it is not necessary to
apply shellac. Continue to use.
(3) Old armyworm board, glued, painted and used repeatedly
We have a special small package of shellac for end users, which can
be used repeatedly. The insect trap glue in a **0g vial can be
coated with ****0 pieces of *5x*5cm insect plate (double-sided).
The method of gluing is very simple. Without special tools, take
two insect plates with two hands, one with one hand, take about 2.5
grams of shellac, and spread it evenly on the insect plate. Then
use both hands to close the two insect plates together, and then
slowly separate and close them. The shellac will stick evenly after
a few times of closing. Then, open and close the A side of the
insect plate to the B side of the other plate with glue. Finally,
face the A side of the B insect plate to the B side of the A raw
plate, and separate and close it several times, There is glue on
all sides of the two worm boards.
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 11.5 ~ 762.5 / Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 11.5 |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
