Prix FOB
Obtenir le dernier prix|
12.5 Metric Ton Minimum Order
Pays:
Malaysia
N ° de modèle:
Nexrubber B43
Prix FOB:
Localité:
Malaysia
Prix de commande minimale:
-
Commande minimale:
12.5 Metric Ton
Packaging Detail:
Sheet/roll on pallet, plastic wrap
Heure de livraison:
15 days
Capacité de Fournir:
50 Metric Ton per Month
Payment Type:
D/P, T/T
Groupe de produits :
-
Malaysia
Personne àcontacter Mr. Zahar
No.32A, Jalan TS 6/9, Tama Industri Subang, Subang Jaya, Slangor
All tire waste are selected so that only buffing is used in the
process to ensure quality of Nexrubber Compound. It is quite
unusual to some but Nexrubber Compound B*3 can be used **0% by
itself for some rubber products.
We deal direct to tire manufacturers and perform
quality check
and audit of
their waste before buying them.
Product Details:
Black sheet/roll - *0kg per roll
Sheet size: 3m x 0.9m x 1.5mm
Packaging - on pallet and shrink wrap.
MOQ
*0FCL : *2.5mtÂ
*0FCL : *2.5mt [sheet
form also available to achieve
*8mt/*0FCL]
Tensile strength: ****2Mpa
Mooney (1*4): *****5 [although
high mooney, after blending it will
reduce]
Elongation at Break : ******0%
Abrassion: *0
Hardness Shore A: *0 +/*2
Density gm/cm3: 1.*2
Tear strength N/mm: *3
Delivery: First time order ****0 days.Â
Non-toxic - refer test from SIRIM.
Currently used by top tire companies to make retread for
truck/bus.
How to use B*3?
1) Mix *0% B*3 in an internal mixer or two-roll with
virgin/original compound *0%
2) Blend it for **5min
3) Keep temperature below **0oC
4) After blending take it out
5) Take a batch of mixed compound to a mixing
mill
6) This is the same process with/without B*3. Add sulphur
-same as before.
7) After **3mins - insert into an extruder
8) The output compound is ready to be mold
9) In the mold, set curing temperature for
******0oC
*0) Curing time varies between ***5mins depending on
product size. Smaller product may apply fast-cure
process.
Manufacturer can blend as much as possible to save cost by
observing how the property drops as percentage blending
increases. Manufacturer may also adjust CTP, DPG or TBBS to
adjust curing
time. It
is worth trying and performs trial and error a
bit.
Some customer blends for up to *0%. Go up step by
step.
Guaranteed quality. On time delivery.Â
Ordering
Deposit *0% only on order. Balance *0% before shipment and
after inspection.
| Pays: | Malaysia |
| N ° de modèle: | Nexrubber B43 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | Malaysia |
| Prix de commande minimale: | - |
| Commande minimale: | 12.5 Metric Ton |
| Packaging Detail: | Sheet/roll on pallet, plastic wrap |
| Heure de livraison: | 15 days |
| Capacité de Fournir: | 50 Metric Ton per Month |
| Payment Type: | D/P, T/T |
| Groupe de produits : | - |
