Prix FOB
Obtenir le dernier prix5.5 ~ 7.9 / Kilogram
|200 Kilogram Minimum Order
Pays:
China
N ° de modèle:
638# 630#
Prix FOB:
5.5 ~ 7.9 / Kilogram Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
5.5 per Kilogram
Commande minimale:
200 Kilogram
Packaging Detail:
25kgs/drum vacuum package or 200kgs/drum
Heure de livraison:
Within 3 days after we confirm your bank receipt.
Capacité de Fournir:
8 Ton per Day
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Mr. Chris
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District, Shenzhen, Guangdong

Â
FEATURES of RTV 2 silicone rubber:
1.Two-part of RTV 2 silicone rubber flowable liquid silicon and curing agent.
2.RTV 2 silicone rubber Cures at room temperature within ***6hours.
3.RTV 2 silicone rubber has An exceptional fluidity and good operability.
4.RTV 2 silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
5.RTV 2 silicone rubber has High duplication times.
Model of RTV 2 silicone rubber:
RTV 2 silicone rubber RTV***0#:
Usage:
Silicon rubber for PU/poly resin products,plaster,candles,
gypsums crafts, cement products, concrete/architectural
products,statuary, casting molds making, etc.
|
Model |
**0# |
|
Appearance |
white |
|
Mixing proportion of curing agent (%) |
5% |
|
Operating time (mins *5 0C ) |
****0 |
|
Curing time(hours *5 0C) |
**5 |
|
Hardness (A°) |
*0±2 |
|
Density ( g/cm 3 ) |
1.*8 |
|
Viscosity (Mpas **5 0C) |
****0~****0 |
|
Tensile-strength(kgf /cm2 ) |
≥*0 |
|
Tear-strength (kgf /cm ) |
≥*0 |
|
Elongation-break(%) |
≥ **0 |
|
Retractility(%) |
≤0.3 |
Operations for RTV 2 silicone rubber:
Step One to use RTV 2 silicone rubber: Take **0g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
Step Two to use RTV 2 silicone rubber: vacuum pumping
Without exception, this takes less than *0 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three to use RTV 2 silicone rubber: Brushing cast & Perfusion Molding operation.
Frequently asked questions
of RTV*2 silicone rubber for
mold making

Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubb| Pays: | China |
| N ° de modèle: | 638# 630# |
| Prix FOB: | 5.5 ~ 7.9 / Kilogram Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 5.5 per Kilogram |
| Commande minimale: | 200 Kilogram |
| Packaging Detail: | 25kgs/drum vacuum package or 200kgs/drum |
| Heure de livraison: | Within 3 days after we confirm your bank receipt. |
| Capacité de Fournir: | 8 Ton per Day |
| Payment Type: | L/C, T/T |
| Groupe de produits : | silicone rubber |
