Prix FOB
Obtenir le dernier prix18 ~ 30000 USD / Set
|1 Set Minimum Order
Pays:
China
N ° de modèle:
15-225-900
Prix FOB:
18 ~ 30000 USD / Set Obtenir le dernier prix
Localité:
HangZhou
Prix de commande minimale:
18 per Set
Commande minimale:
1 Set
Packaging Detail:
Normal Standard machine packnig
Heure de livraison:
Within 40 working days after deposit
Capacité de Fournir:
10 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
China
Personne àcontacter Harold
Hangzhou, Zhejiang
Subject: Roll Forming Machine, model # WLFM*********0
| Material specification | Aluminum, galvalume, galvanized and pre-painted galvanized steel. |
| Thickness | 0.3 mm TCT to 0.6mm TCT. |
| Main motor power | 4 kw. |
| Hydraulic station power | 3 kw. |
| Feeding width | ***0mm/ ***0mm. |
| Cover width | **0mm. |
| Yield stress | **5Mpa ~ **0Mpa. |
| Roll forming Speed | *2 m/minute. |
| Cutting Tolerance | +/*2.5mm(length≤***0mm); +/*3.0mm(***0mmlength≤****0mm). |
| Hydraulic Uncoiler | Capacity: ***0kgs. |
| Coil inner diameter | **8mm. |
| Voltage | voltage **5V, *0HZ, 3 phase. |
| Numbers of stands | About *0 stands/stations/pairs. |
| Type of cutting | Roll-formed and length-set profile cutting. |
| Roller Material | High grade S*5C forged steel, coated with hard chrome. |
| Active Shaft Material | High grade S*5C carbon wrought steel, diameter *6mm. |
| Electric Elements |
PLC control console, touch screen and transducer, from
Siemens, Germany. Other elements, from Schneider Electric, Germany. |
| Cutter blades |
Cr*2MoV steel with quenched treatment, hardness HRC*8~*1, wear-resistance, good steel structure, long life. |
| Coil Feeding Equipment | Consists of one uncoiler with capacity of 5 tons and its base. The steel sheet is manually fed to guiding equipment under the function of friction and traction. |
| Infeed Guide | Adopting guiding bar and sliding block (sheet lubricator) to control the width and position of the steel sheet. The coil sheet is guided in the correct position and passed to the roll forming equipment. |
| Mainframe Transmission | Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. |
| Roll Forming Station | The main frame of machine is welded separately and the outside wall is connected by screw after being roto blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. The tooling is PLC precision machined and supported with pre-lubricated rolling contact bearings. |
| Post-cut Equipment | Stationary hydraulic post shear/guillotine. The length and quantity of pieces can be set by the buyer through the control console, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting. |
| Hydraulic Station | Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power. |
| PLC Control Console |
The electric controlling
system of this machine consists of five parts: operating
system, touch screen, PLC, transducer and strong electricity
parts. The controlling system of this machine is imported
from Siemens, Germany. The system uses modularized structure
and has convenient, reasonable, canonical wiring arrangement,
and its maintenance is quite easy. The independent operating
console facilitates the mutual dialogue between the operator
and the machine. The operation is easy and steady and can be
chosen operation by manual or automatically.   |
| Product Support Table | To support the finished run out panels. The quantity we supply is 2 pieces with length 2 meters; it can support panels with more than 4 meters in normal condition. |
| 1) | Hydraulic Uncoiler | 1set |
| 2) | Infeed Guide | 1set |
| 3) | Roll Forming Station | 1set |
| 4) | Post-cut Equipment | 1set |
| 5) | Hydraulic Station | 1pc |
| 6) | PLC Control Console | 1pc |
| 7) | Product Support Table | 2pcs |
| 8) | Spare Parts | 1box |
| Pays: | China |
| N ° de modèle: | 15-225-900 |
| Prix FOB: | 18 ~ 30000 / Set Obtenir le dernier prix |
| Localité: | HangZhou |
| Prix de commande minimale: | 18 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | Normal Standard machine packnig |
| Heure de livraison: | Within 40 working days after deposit |
| Capacité de Fournir: | 10 Set per Month |
| Payment Type: | T/T, L/C |
| Groupe de produits : | machine |
