Prix FOB
Obtenir le dernier prix1 ~ 50 / Piece
|30 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
1 ~ 50 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
1 per Piece
Commande minimale:
30 Piece
Packaging Detail:
wood , plastic bags, as your req
Heure de livraison:
15-20DAYS
Capacité de Fournir:
1000000 Piece per Month
Payment Type:
L/C, T/T
Groupe de produits :
-
Personne àcontacter Guoyue
Cangzhou, Hebei
Pipe press cap fitting
ÂÂPipe press cap fitting :High quality inox plumbing sanitary stainless steel **4 **6 press fitting .
ÂÂShean press fitting system joins pipe without welding or bolting, can be widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. It has already replaced welding fittings in most Europe countries, Asia countries, America, Australia and some other countries.
ÂÂÂÂ
ÂÂTechnical information:
ÂÂ*- Material: Stainless steel **4 and **6 available.
ÂÂ*- Max working pressure 1.6MPa (equal to **2 psi),
ÂÂtesting water pressure: 2.5MPa for JIS sizes (equal to **2.5psi), and 5MPa for EN****2 sizes.
ÂÂ*- Working temperature from **0 to **0 degree centigrade (with Chlorinated butyl rubber O ring),
ÂÂ*- Suit medium: cold water, hot water, compressed air, gas, oil etc
ÂÂPipe press cap fitting Standard:
ÂÂPress fitting standard: GB/T ****8.*****3, DVGW W*******5 and JWWA G**6
ÂÂPipe standard: GB/T ****8.*****3, BS EN ****2 and JIS G***8
ÂÂSealing ring standard: GBT ****8.*****3, EN****1:***8
ÂÂFeatures of **4 fast connector press type cap
ÂÂBy connecting of press fit fittings,the pipeline has high strength,make the connect point SOLID at beginning and one time. It does not like threaded pipe fittings,via shocking,threads turns to loose.There is less chances of loosen of couplings in some accident,i.e. Earthquake,house quake,pipeline resonance and hammer vibration. No gas leakage or smoke or fire smoke.
ÂÂInstall by a special small tooling,without welding and threaded,cost and risk are reduced,installation time reduced half,just speed us efficiency.
ÂÂCompare to threaded **0LB pipe fittings, such fittings should screw turn by turn to be solid fixed, then check if any leakage, if any,shall replace or use Nylon webbing to wrap to test again,until fine enough. compare to butt welded pipe fittings, such fittings should welding between fittings by welding machine along with welding rods,should take lots of time welding from fitting and pipes bevel end bottom small angle to upper bigger bevel angle to ensure the welding work strong.
ÂÂPress fit fitting will insert to straight pipes and press by tool hardly in one time,with O rings inside of fitting,this connect way reduced water or gas leakage,reduced risk of repair and renewal under shade underground environment.
ÂÂPress fittings has *0 years using life,one time install,long time free of human repair. Greatly reduced cost of products and service fees.
ÂÂÂÂ
ÂÂSealing ring material:
ÂÂOption 1. CIIR(Chlorinated butyl rubber): Sanitary for human consumption, not oil resistant. Suitable for drinking water, tap water, hot and cold water, sanitary air.
ÂÂOption 2. EPDM(Ethylene-Propylene-Diene Monomer) : Sanitary for human consumer, not oil resistant. Suitable for drinking water, tap water, hot and cold water, sanitary air and compressed gas.
ÂÂOption 3: FKM(Fluororubber): It is both oil proof and sanitary. suitable for edible oil, compressed air. But a little more expensive than CIIR, EPDM and NBR.
ÂÂSizes range Pipe press cap fitting :
ÂÂThe norminal diameters are: DN*5, *0, *5, *2, *0, *0, *5, *0 and DN**0, including GB 1 and GB 2.
ÂÂGB 1 series is same size as EN****2, out diameters are: *8, *2, *8, *5, *2, *4, *6.1, *8.9, **8mm.
ÂÂGB 2 series is same size as JIS G ***8, out diameters are: *5.*8, *2.*2, *8.*8, *4.*0, *2.7, *8.6, *6.1, *8.9, **8mm.
ÂÂPart of our site:
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
ÂÂInstallation case example:
ÂÂÂÂ
ÂÂÂÂ
ÂÂOur Services
ÂÂ* Free sample: we can provide a few free sample for evaluation.
ÂÂ* After-sales service: we provide after-sales technical support for clients.
ÂÂ* Strict Quality control: we have **0% inspection before delivery to ensure every pieces are in good quality.
ÂÂ* **0% replacment if any defects to customers requirements.
ÂÂPackaging & Shipping
ÂÂFor press fittings packing: we pack press fittings in plastic bag to prevent surface scratch, and then pack them inside brown export cartons.
ÂÂFor pipe packing: we pack the stainless steel pipes inside polybag, so that it can prevent surface scratch, and keep dirts away from the inside of the pipes.
ÂÂIf you have special requirement on packing, please tell us.
ÂÂCompany InformationÂÂ
ÂÂWe are an ISO certified professional manufaturer supplying stainless steel press fittings and pipes.
ÂÂWe have the following certificates:
ÂÂISO***1:***8 certification,
ÂÂSGS witness report;
ÂÂDVGW certificate;
ÂÂPlease contact us for free sample
and pricelist.
ÂÂ
Pays: | China |
N ° de modèle: | - |
Prix FOB: | 1 ~ 50 / Piece Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | 1 per Piece |
Commande minimale: | 30 Piece |
Packaging Detail: | wood , plastic bags, as your req |
Heure de livraison: | 15-20DAYS |
Capacité de Fournir: | 1000000 Piece per Month |
Payment Type: | L/C, T/T |
Groupe de produits : | - |