About
ATS
RDS2 series
Auto changeover switch mainly used for distribution or
electromotor network under *0Hz, rated voltage **0V, rated
DC voltage **0V, and rated current *6A to ***0A, change
over between main power and backup power, mutual work as
backup power system and city power and Generator power. At
the same time, it can act as disconnector for the
un-frequency ON and OFF circuit or lines.
Such product are widely used in the power transmission and
distribution system and atomization system of important
site which power off is not allowed, such as fire-fighting,
hospital, bank, high buildings etc.
RDS2 Auto Transfer Switch Equipment (ATSE), is integrate
the switch and logical control together, no need extra
controller, is an electromechanical integration auto
transfer switch, with voltage monitoring, frequency
monitoring, communication port, electrical and mechanical
interlock functions etc., can achieve auto control, remote
motor control and emergency manual
control.Â
Â
Operation is
achieve by logical control board with various logical
commands to managing the motor, gear-box running, motor
with spring energy storage, instant release accelerating
mechanism, quickly open and close the circuit or make quick
transferring, through visible status to make sure the
safety isolation, greatly improved the every electrical and
mechanical performance.Â
Â
RDS2 ATS
integral designed with metal case, compact and
strong.
Â
RDS2 ATS, the
control part is with metal cover, switch part with DMC
case, have strong dielectric performance, protection
performance and reliable operation safety.
Â
The switch
suitable for auto transfer between main power and backup
power system or two load equipment's auto transfer and safe
isolation etc.Â
Â
The switch has
beautiful appearance, novelty, small size, complete
functions, is the best choose among the similar
products.
Â
RDS2 series
product have passed the EMC test.
RDS2Â Advantages:
Â
It adopted
double complex contact/ horizontal pulling
mechanism/micro motor energy pre storage and
micro-computer control technology, basically come to Zero
arc ( no arcing chamber);
Adopted reliable mechanical interlock and electric
interlock, executive unit adopt independent load
disconnect switch, it makes more reliable and safety;
Adopt "Zero Position" technology, it can force to set to
Zero Position under emergency situation ( cutoff two way
power supply, meet the fire linkage requirements;
Load disconnect switch change over adopt singleness motor
drive, switch over smooth and reliable, no noise, little
impact;
The driving motor have instant current across only under
the load disconnect switch change over, stable working
status no need to provide the working current,
outstanding energy saving.
Executive load disconnect switch have mechanical
interlock, make sure the Normal power and Reserve Power
working reliable and no interference;
Distinct ON and OFF position indicator, padlock function
etc., make reliable and safe isolation between power
supply and loading.
High security, high automatization, high reliability,
working life more than ***0 times;
Electromechanical integration design, accuracy change
over, flexible, smoothly, adopt international advanced
logical control technology, high anti-interference
ability, no interference outward.
Have main power ON, backup power OFF; main power OFF,
backup power ON; main and backup power OFF; three working
mode (I-o-II);
Easy installation, control circuit adopt plug type
terminal connection
Four operating functions: Emergency manual, motor remote
control, emergency OFF under auto control status, auto
control operation.
Â
Â
Basic Type Switch Control
Characteristic
Suitable for two way main and backup power system,
auto transfer with auto recovery;
Can expand functions by outer connection;
Auto, Remote, Manual control functions;
Delay 0.5s signal detect, avoid miss actuation;
Under Auto control status have "O" position remote
control;
Can with RS***5 communication port ( optional),
according to customer required.
Â
Â
Dlivery
Terms
Shipment
& Express & Air express
Â