Prix FOB
Obtenir le dernier prix( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
CNC-540/75A
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
Taiwan
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
Wood cases
Heure de livraison:
30 days
Capacité de Fournir:
10 Set per Month
Payment Type:
T/T, L/C, Money Gram
Groupe de produits :
Personne àcontacter Mr. Yang
Yongfuroad no.8, Dongguan, Guangdong
Machine Unit
The machine use stationary worktable,the machining accuracy will
not be affected by the worktable load, X/Y axis movement applied
RAM structure,high precision linear guide slides are used for
transmission, low coefficient of friction, good rigidity, large
travel, and more suitable for large and medium-sized mold
processing.
The spindle supported by 2 precise roller guide,drive by DC servo
motor with ball screw.
The spindle rod is double nut enhanced type, ensure that no
backlash, lower the drive torque, accurate and reliable micro feed
DC servo system coupled with the control system,to realize the
adaptive control processing.
Gapless timing belt toothed belt drive ratio accurately, high
positioning accuracy and stable. Entire spindle system is
characteristic of high sensitivity, no creeping, good spindle
anti-torsion performance, high linear precision, large loading
capacity, high rigidity comprehensive advantages.
There is a electrode coupling board with T-slot under the
spindle,the electrode coupling board and the spindle is
insulated,it could load the large electrode,in the meanwhile,it
could refit with the various tools to meet the requirements of
loading small electrode.
The worktable and the machine bed used high precision iron
casting,being through the aging treatment,which is enlarge the
effective working area,and improve the rigidity of the worktable as
well,to avoid affecting the machining accuracy while the workpiece
loaded.
Control Unit
Point to Point automatic movement,the maximum memory points is
**0*****0
*0 groups automatic fine machining,just one time to complete the
mould machining from rough-medium-fine.
5 groups swing function setting provided,the same mould could be
set 5 different swing mode at the same time.
*0 groups of different molds and clients numbering and filing.
Automatic compensate the electrode loss,when process massive
holes,we can preset the electrode loss value,the computer will
compensate the depth automatically to make the depth of each holes
the same.
Automatic edge finding and center finding.
The condition of electrical discharging adjust automatically while
the discharging is unstable,the computer will modify the
discharging efficient and running time. When it becomes stable,the
condition will recover as it was. The machining data could be
modified at any time while the machining process.
Automatic origin finding function,the computer could find and go
back to the origin automatically when the power is off and
recover.
Auto anti-carbon deposition detecting function,when the machine is
running unstable,computer will adjust the parameter settings and
improve the chips removal height,and it will recover when it gets
stable.
Mirror machining circuit, can get a real mirror effect.
â—‹/â–¡/×/＋/ worktable swing and side discharging function.
Use dialogue type operation interface in Chinese and English,the
parameter setting is easy to according the operator's
habbit.
To test the program is correct or not,there is a DRY RUNNING mode
could be used before discharging.
AUTOZ auto editing-the automatic machining data will complete,just
need to the maximum depth initial current and the selection
of the quality of products.Â
Intellective condition editing-just to select the shape,materials
and the cross-sectional area of the electrodes,as well as the
quality of the products,machining depth,and complete the parameter
setting, the process would be completed this
way:Rough-Middle-Fine.
The measurement of the axes XYZ can be switched from Metric and
Imperial.
Functions of clearing two times discharging and carbon
deposition,rapid elevating and discharge edge finding.
Special large area machining circuit detection control makes the
surface line more smooth and uniform.
Discharge upward function makes machining special workpiece
easy.
Parallel connection discharging circuit,can bear higher
current,more stable. Making he discharging board a lower fault.
New design of controller and *5 inch CRT display is in line with
Europe CE safety standards,which is characteristic of
anti-dust,anti-water and anti-tampering.Industrial PC based
controller and used DOM new memory instead of traditional hard
drive,improved the file reading speed to apply industrial uses.
Specifications of CNC Sinker EDM Machine Model:CNC***0 / *5A
The movement of Axes
1.Longitudinal travel of worktable X -axis **0 mm
2.Cross travel of worktable
Y-axis       **0 mm
3.Ram servo travel
Z-axis            Â
**0 mm
Worktable
1.Maximum Load ***0 kg
2.Out size of work tank :***0***0***0 mm
3.Dimension of worktable **0***0mm
Oil Tank
1.Gross weight of oil tank **0 kg
2.Capacity of oil tank ***0 Litres
Other Parameters
1.Maximum distance from the work head to the surface of worktable
**0~**0 mm
2.Maximum weight of electrode  **0 kg
3.Gross weight of complete machine ***0 kg
CNC control unit
Control Method and Axes ...........Close Loop(xyz *-axis)
Min.Setting Unit ................0.**5mm(0.**1mm)
Max.Setting Unit ............***9.**5mm(***9.***9mm)
Coordinate System ..........INC/ABS
Display System .............*5 inch CRT/VGA
Control System .............PC BASE
Inching ..................0.**5mm(unit)×1，×5，×*0
Data savings...............****0 groups
Max.Machining Current...........*5A
Total Power ........... 6KVA
Max.Material Removal Rate ........**0 Mm /min
Electrode Wear Rate .............<0.2 %
Best Surface Roughness .......... 0.*5 um Ra
External Dimension(X.Y.Z) ....... **0×**0×***0mm
Packing Dimension(X.Y.Z) ........**0×**0×***0mm
Net Weight .................. **0 kg
Machining Setting amount Per set ........*0
Steps................... *0
Machining Mode........... Sqr/X/Rd/Crs/Side Sparking
orbit Cutting ...........XY(Z Lock), XYZ
Continuous Machiningmakehole amount ......**0
Standard Accessories:
1.Monitor Displayed&*-AXes Linear Scales
2.Z Axis DC Servo Motors & Ball scr3ws.
3.1 PCS Electorde Holder.
4.1 PCS Working Lamp.
5.1 Set Tools With Toolbox &Clamping Kits.
6.1 Set Cartridge Paper Filters.
7.Machine Level Mounts.
8.Auto Fired Detect System&Extinguisher.
9.Remote Control box.
*0.Operation Manual&Technical Data
Â
| Pays: | China |
| N ° de modèle: | CNC-540/75A |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | Taiwan |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | Wood cases |
| Heure de livraison: | 30 days |
| Capacité de Fournir: | 10 Set per Month |
| Payment Type: | T/T, L/C, Money Gram |
| Groupe de produits : | Sinker Electrical Discharge Machine |
