La description
Descriptions Oar blade harrow Dryer a new type drying machine,
which is designed with the combination of oar blade dryer heat
drying principle, with a higher drying efficiency, for a variety of
raw materials.
The inner equipped oar blade and screw with continuous, axial and
radial mixing of raw materials, make the materials to be dried more
evenly. With applied both oar blade and screw, when the raw
materials were turned over by mixing blades, they speed up the
materials contact with heating surface of the dryer, so heat
transfer rate is increased, and is conducive to moisture
evaporation. Structure The loading cylinder of raw materials will
be equipped with heating jacket, and heat insulation layer will be
equipped outside the jacket, which will prevent the heat be
transferred, and also reduce the heat loss. Discharge hole is
equipped with the lower part of the cylinder, on the top of the
cylinder with two feeding holes and an air exhaust outlet. When
feeding, the raw materials should be fed equally from the two
feeding holes, the best feeding capacity is about *0%**0% of the
volume of the cylinder, the max feeding capacity should not exceed
*0%, otherwise will affect the smooth discharge of gas evaporation.
When the sticky raw material is feeding, the feeding capacity
should be reduced, to prevent the drive motor overloaded, damage to
equipment.
Hollow shaft is set inside the center of the cylinder, in heating
medium will be put into the shaft (like hot conduction oil or hot
water).
On the hollow shaft distributed with oar blades with certain angle,
the oar blades are also hollow within heating transferred, inlet
and outlet of hot oil conduction are equipped inside of the blades,
to ensure the heat transfer efficiency during the drying.
Seals: Packing seals are equipped during shaft and cylinder.
Transmission: Except the special models, we normally apply the
chain or gear transmission style. Pivot bear apply duplex bearing
combination , with tapered roller bearing and deep groove ball
bearing combined, to meeting the requirements of radial and axial
force. Applications Compact structure, small occupied area.
High utilization of heat, low operation cost.
Wide adaptability of raw material, the drying degree is evenly.
Suitable for drying many kinds of raw meterials. Features Suitable
for medicine, chemical, food industries with compact structure, and
other industries without organic solvents or flammable material of
the conductive drying. Principle The main structure of oar blade
harrow dryer are round cylinder and one rotary hollow shaft
equipped in the center of the cylinder. On the shaft are
distributed hollow oar blades, the heating are transferred by
jacket in the cylinder and the surface of the hollow blades, and
the moisture evaporated. During heating, the blades will also mix
the materials, so that update the heating area. It is a continuous
heating transferred dryer.
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
1000 ~ 10000 / Set (Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
1000 per Set |
| Commande minimale: |
1 Set |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
T/T, L/C, Western Union, PayPal |
| Groupe de produits : |
Dryer
|
