Prix FOB
Obtenir le dernier prix( Negotiable )
|6000 Piece Minimum Order
Pays:
China
N ° de modèle:
PU-007
Prix FOB:
( Negotiable )Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
6000 Piece
Packaging Detail:
40 pieces into a carton
Heure de livraison:
About 3~4 weeks
Capacité de Fournir:
-
Payment Type:
T/T, Western Union, Other
Groupe de produits :
Personne àcontacter Ms. phoebe
Third Floor, B Building, No.92, Wangjiangkeng Village, Dakan, Xili, Nanshan District, Shenzhen, Guangdong
1. Technical Data Sheet:
Testing Items |
Performance |
Appearance |
Black |
Density  (g/cm³) |
1.*0±0.*5 |
Sagging properties(mm) |
0 |
Shore A-hardness(A°) |
*0±3 |
Tensile strength( Mpa) |
≥8.0 |
Elongation at break (%) |
≥**0 |
Volatile content (%) |
≤3 |
Tensile-share strength(Mpa) |
≥4.5 |
Touch Dry time  (min) |
*0~*0 |
Curing speed   (mm/*4h) |
3~5 |
Extrudability   (g/min) |
≥*0 |
Pollution properties |
Non |
Application temperature  (ºC) |
 *5~**5 |
Shelf life(month) |
≥9 |
2.
Deacription:
PU***7 is one component high quality polyurethane sealant for car
manufactory and aftermarket, it cures by reaction with atmospheric
moisture to form a durable and weathering resistant elastomer,
PU***7 is manufactured in accordance with the ISO/TS
****9:***2.
3. USES:
Suitable for adhesion between windshield/ side glass and the main
part of cars, buses and special vehicles.Â
Suitable for Automobile body structural bonding and
sealing.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and
contaminants such as oil dust, grease, frost, water, dirt, old
sealants and any protective coating. Dust and loose particles
should be cleaned.
5. PACKAGING:
**0ml cartridge, *0 pcs/carton
 **0ml/**0ml
sausage, *0 pcs/carton
6.APPLICATION:
Minimum application temperature: 5°C.
PU***7 should be dispensed from either the cartridge or sausage by
means of a caulking gun. Pierce the membrane at the top of the
cartridge and screw on the nozzle. Cut nozzle to give the required
angle and bead size. Place the cartridge in an applicator gun and
squeeze the trigger. For sausages, a barrel gun is required, clip
the end of the sausage and place in barrel gun. Screw end cap and
nozzle on to barrel gun. Using the trigger extrude the sealant, to
stop depress using the catch plate. Apply PU***7 in a continuous
bead using enough pressure to properly apply the
sealant.
7.
ADVANTAGES:
 One-component
formulation, excellent smooth appearance.Â
 High adhesion strength, modest Hardness after
curing.
Durable and excellent extrudability.
No sagging, no pollution and corrosion to base material and
environment.
Excellent sealing and adhesion performance, excellent water and
aging resistance.
8.ADVICE:
Surfaces must be clean, dry and free from grease, oil and dust. The
surfaces must be treated with a cleaning or activating agent and
primed with the appropriate primer.
Please construct by application instructions strictly, failure of
stickiness may be caused by any operation disobeying construction
techniques.
This product is innocuous after curing completely, but before set,
please avoids contacting with eyes and skin. In case of eyes and
skin contact, wash immediately and thoroughly with soap and water.
See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.
Â
Pays: | China |
N ° de modèle: | PU-007 |
Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | 6000 Piece |
Packaging Detail: | 40 pieces into a carton |
Heure de livraison: | About 3~4 weeks |
Capacité de Fournir: | - |
Payment Type: | T/T, Western Union, Other |
Groupe de produits : | Silicone Sealant |