Prix FOB
Obtenir le dernier prix0 ~ 10000 USD ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
XRFD-295-300
Prix FOB:
0 ~ 10000 USD ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
Seaworthy packing
Heure de livraison:
30 to 45 days, after receipt of the deposit
Capacité de Fournir:
30 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter Ms. Yin
YONG\'AN ROAD128, Suzhou, Jiangsu
Nitrogen offers a
wide range of applications such as purging, firefighter,
creating inert atmosphere, carrier gas, blanketing, packing,
filling, plastic molding, so on and so forth. On -site nitrogen
generation is a favorable choice for many manufacturers as it
is an easy and reliable way for them to save money and give
free control over the nitrogen gas use. Our company offers
on-site nitrogen generation based on the principle of Pressure
Swing Adsorption. Actually, PSA nitrogen gas generators are
usually used in applications where the purity of nitrogen is
higher than *9.5% with oxygen content is lower than 0.5%.
Technological Process
Nitrogen Generators from our company are designed and
manufactured based on the principle of Pressure Swing
Adsorption(PSA). Ambient air, having being compressed and
purified to remove oil, water and dust, enters the adsoption
swing adsorping device with two adsorption towers filled with
carcon molecular sieve(CMS). The compressed air flow to the
adsorption tower from the bottom to up. In the process, oxygen
molecular is adsorbed, while nitrogen flows out of the upper
side of adsorption tower and then enters then buffer tank for
impure nitrogen. After a period of time, the CMS in the
adsorption tower is saturated by the oxygen adsorbed. At this
time, regeneration is needed. It is realized by stopping
adsorbing step and reduce pressure in the adsorption tower.
Adsorption and regeneration are conducted alternatively in the
two adsorption towers to ensure the consecutive output of
nitrogen gas.
PSA Nitrogen Generation Advantages
The gas seperation of PSA takes such advantages as different
gas has different adsorbing capacity in the CMS under different
pressure to separate gases. PSA nitrogen generators are
designed based on the PSA theory. They possess the properties
of simple technology, low space requirement, quick start up,
simple maintenance&operation, good applicability, high
automation, low operation cost, low investment, etc.
1) convenient and efficient to generate nitrogen: Advance
technology, special gas flow distributor to make the gas
distribute more well-distributed, high efficient use of CMS,
qualified nitrogen can be offered within *5 to *0 minutes.
2) Convenient use: The equipment structure is compact, low
space coverage and no need of construction investment, low
investment, the only thing to do is to connect power to
generate nitrogen.
3) More economical than other ways of nitrogen supply: PSA
technology is a simple way to generate nitrogen. It takes air
as source, and the only energy consumption is only electricity
consumption. So it has the advantages of low operation cost,
low energy consumption and high efficiency.
4) Electromechanical integrated design to realize automatic
operation: Imported PLC control the full automation, the flow
rate, pressure and purity of nitrogen can be regulated and
displayed consecutively; No personnel is needed to be on
duty.
Wide application scope:
Nitrogen produced by this PSA generator can be uses as the
protective gas in heat treating process; Chemical industry
production, nitrogen filled for purification in all kinds of
storage tank and pipeline; Gas for production of rubber and
plastic products; Oxygen exclusion and keeping food fresh in
food industry package; Purification and blanket gas in beverage
industry; Nitrogen filled for package and exclusion of oxygen
for container in pharmaceuticals industry; As protective gas in
the process of producing electronic component and semiconductor
in electronic industry. Purity, flow rate and pressure are
stable and can be regulated to satisfy the different
customers'needs.
Enhancement: To ensure the better quality, the main parts such
as CMS and PLC, we use world famous brand Germany BF and Japan
MITSUBISHI
Delivery Details:
Packaging details: Standard export packaging
Delivery details: Within ****0days after receipt of the
deposit
| Pays: | China |
| N ° de modèle: | XRFD-295-300 |
| Prix FOB: | 0 ~ 10000 ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | Seaworthy packing |
| Heure de livraison: | 30 to 45 days, after receipt of the deposit |
| Capacité de Fournir: | 30 Set per Month |
| Payment Type: | T/T, L/C |
| Groupe de produits : | - |
