Prix FOB
Obtenir le dernier prix0 ~ 1000
|- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
0 ~ 1000 Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
840X650X400
Heure de livraison:
-
Capacité de Fournir:
100000 Set per Year
Payment Type:
PayPal, D/P, L/C, T/T
Groupe de produits :
Personne àcontacter Ms. Echo
Xinshiji, Xingtai, Hebei
1. Lift sensor
There is a lift sensor located on each front
wheel.
If the mower was lifted 2cm from the ground in a level way, the
blade stop working within 2s, but the wheel keep
running.
And the blades start cutting within 5s after two front wheels get
back to ground.
2. Tilt sensor
There is tilt sensor installed on the mower too, when the mower was
titled over *0 degree at any direction,
it also will stop working within 2seconds
3. Bump sensor
In front of the mower there equipped with bump sensors that will
activate when the mower strikes solid,
fixed object when that object is at least 6.5cm in vertical height
from the supporting surface of the mower. When the bump sensor is
activated, the mower will stop movement in that direction and
reverse itself away from the obstacle.
4. Rain sensor
There are two rain sensors on the top cover of
mower.
The mower will go back to the charging station automatically when
it's raining.
5. Wireless controller
Remote-operated the mower
6. Anti-theft function
The mower should be turned on by key. And it can't start working
without a matched charging station.
7. Virtual wire
The robot lawn mower can't operate without the virtual wire. (We
suggest you to use **0m***0m of virtual wire).
It leads the mower back to charging station and the mower will take
is as a wall when it is working.
It will get on the virtual wire until it meets charging sheet which
located in front if charging station,
then it gets off virtual and start cutting.
8. Auto recharge system
If the mower is powerless while it in operating, the cutting motor
turn off at once and
it will find the virtual wire then go alone it back to charging
station for recharge automatically.
(This allows you to keep the charger connected with the charging
station all the time, even after the battery is fully
charged.)
On auto pattern, the mower will go on mowing after fully
recharged.
But if it is on manual pattern, it will just get back from charging
station for a few centimeter after fully
recharged.
9. Emergency stop switch
There is an emergency stop switch located on the back of mower and
red in color.
If you press it in any case during operation, the mower must stop
all movement and
stop the rotating of blades immediately. Rotating the switch resets
it.
*0. Two cutting modes
There are two cutting modes of the mower, go straight and go circle
(high efficiency).
*1.Ultrasonic Sensor
If Automower meet obstacle, it can auto avoid.
*2.Easy height adjustment
The cutting height adjustment is easily done from above by
push-pull one lever
Feature:
- Brainpower movement pattern
- Automatic self-charging station
- Obstacle avoidance
- Rain avoidance
- Time schedule
- Anti-theft lock
- Adjusting the cutting height
- Boundary Virtual wire system
- virtual-Fence close-loop system
- Min. Double safety protection
- Remote control
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 0 ~ 1000 Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | 840X650X400 |
| Heure de livraison: | - |
| Capacité de Fournir: | 100000 Set per Year |
| Payment Type: | PayPal, D/P, L/C, T/T |
| Groupe de produits : | mower |
