Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
MXE
Prix FOB:
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
5000sets/month
Payment Type:
-
Groupe de produits :
Personne àcontacter Mr. David
Micher Solar Energy Industrial Park, Jiaxing, Zhejiang
Work Principle
1. Solar energy is absorbed by the vacuum tubes, then it is
transferred to the heat-pipe through the aluminum fin.
2. Heated by the energy, the medium in the heat-pipe transfers the
heat energy to the condenser zone of the heat-pipe.
3. The condenser zone of the heat-pipe is inserted to the copper
sleeves which are distributed on the water pipe averagely.
4. When water or other medium in the water pipe flows across the
copper sleeves, they would bring the energy and be heated.
5. The heated water or other medium makes water in the tank hotter
and hotter by walking across the coils in the tank.
Features:
1. No Water In Tubes, No Freeze;
2. Work With Heat Pipe, Heat Rapidly;
3. Advanced Welding, Good Material, Long Using Life
We used the advanced welding technology(argon welding), and take
the SUS****2B or SUS****1.2mm as the inner tank material, the using
life of system is more than *5years.
4. High Pressure And Safe Operation
We install relief valve to the cold water inlet, and install air
vent and T. P. Valve for the tank to protect it against the high
temperature and pressure. So, it is safety.
5. Energy Saving And Environment Protecting: Taking advantage of solar energy, free of charge, and no pollution
6. Mutifunction: Bathing, washing, domestic heating, swimming pool water heating, etc
Â
| Description | Pressurized Solar Water Heater |
| Material of out tank | 0.4mm thickness SUS***-BA Stainless Steel |
| Material of inner tank | Food grade 1.2mm thickness SUS****2B Stainless Steel |
| Tank insulating layer | *5mm high-density polyurethane foam |
| Inlet and outlet hole | Male G 1/2,  3/4 |
| Heat Pipe | TU Copper |
| Material of Vacuum tube | 3.3 Borosilicate glass |
| Vacuum tube coating | Cr-Al-N/Al/Cu (three target type) |
| Heat exchanging coil | Copper *2mm diameter, 1.0mm thickness |
| Absorption | As=0.***0.*6(AM1.5) |
| Emission ratio | Ε h=0.***0.*6(*0C± 5C) |
| Idle sunning property parameters | Y=**0~**0m2. C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(m2. C) |
| Bracket: | Galvanized steel : thickness 1.5mm |
| welding: | Argon arc welding |
| fastening pieces: | Made of stainless steel screw |
| Max Pressure | 0.6 MPa(6 bar) |
| Description | Pressurized Solar Water Heater |
| Material of out tank | 0.4mm thickness SUS***-BA Stainless Steel |
| Material of inner tank | Food grade 1.2mm thickness SUS****2B Stainless Steel |
| Tank insulating layer | *5mm high-density polyurethane foam |
| Inlet and outlet hole | Male G 1/2,  3/4 |
| Heat Pipe | TU Copper |
| Material of Vacuum tube | 3.3 Borosilicate glass |
| Vacuum tube coating | Cr-Al-N/Al/Cu (three target type) |
| Heat exchanging coil | Copper *2mm diameter, 1.0mm thickness |
| Absorption | As=0.***0.*6(AM1.5) |
| Emission ratio | Ε h=0.***0.*6(*0C± 5C) |
| Idle sunning property parameters | Y=**0~**0m2. C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(m2. C) |
| Bracket: | Galvanized steel : thickness 1.5mm |
| welding: | Argon arc welding |
| fastening pieces: | Made of stainless steel screw |
| Max Pressure | 0.6 MPa(6 bar) |
| Pays: | China |
| N ° de modèle: | MXE |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 5000sets/month |
| Payment Type: | - |
| Groupe de produits : | Solar Water Heaters |
