Prix FOB
Obtenir le dernier prix800 ~ 1600 / Ton ( Negotiable )
|10 Ton Minimum Order
Pays:
China
N ° de modèle:
LDPE (low density polyethylene)
Prix FOB:
800 ~ 1600 / Ton ( Negotiable ) Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
800 per Ton
Commande minimale:
10 Ton
Packaging Detail:
25 kg/PP bag or as customers' request.
Heure de livraison:
Within 21days after accept the payment
Capacité de Fournir:
200 Ton per Month
Payment Type:
Western Union, T/T
Groupe de produits :
Personne àcontacter wilma-cn.annachem1.035119
No 75 Chongqing Road Innan Economic Development Area, Lanzhou, Gansu
LDPE (low density polyethylene) plastic Raw material granules
Description:
LDPE (Polyethylene)
1.Type: Virgin&RecycledLDPE is a milky translucent waxy solid resin, non-toxic. Softening point is lower, Above it will be thaw, the hot melt connection, forming performance is good, good flexibility, impact toughness, low temperature resistance is good, but in **0°C ~ **0°C, good electrical insulation.
Â
The physical and chemical properties:
PE material classification:
( 1): LDPE low density polyethylene, high pressure polyethylene ( 2) LLDPE: linear low density polyethylene
( 3): MDPE medium density polyethylene resin, Shuangfeng ( 4) HDPE: high density polyethylene, low pressure polyethyleneÂ
The LDPE poor mechanical strength, heat resistance, resistance to environmental stress cracking resistance, adhesion, adhesion, poor printability, subject to surface treatment, such as chemical erosion, corona treatment before it can improve its adhesion, printing.
The LDPE absorbent is very low, almost no water absorption, chemical stability good, such as acid, alkali, salt, organic solvents are more stable. On CO2, organic odor permeability, but the water vapor, air permeability. Easy burning, burning like a wax;
The LDPE in the sunlight and heat effect easy
degradation and color, from white to yellow to brown, the final
was black, and performance degradation or cracking, if adding a
certain amount of antioxidants, ultraviolet absorbers can improve
performance, in the chemical crosslinking agent or high-energy
radiation crosslinking, can provide high softening point, heat
resistance, stiffness, solvent resistance.
Specifications:
|
Tests
|
Value
|
Unit
|
|
Melt Flow Rate (MFR)
|
0.4
|
g/*0min
|
|
Density
|
0.**1
|
g/cm3
|
|
Power Ash
|
0.*1
|
%
|
|
Tensile Strength
|
*3.5
|
Mpa
|
|
Elongation At Break
|
**0
|
%
|
|
Izod Impact Strength
|
4
|
J/M
|
|
Environmental stress-cracking
|
**0
|
-
|
|
Impact Embrittlement
temperature
|
**0
|
?
|
|
Packing
|
*5kg in pp bag, *0MT/1X*0FCL
|
|
|
Tests
|
Value
|
Unit
|
|
Melt Flow Rate (MFR)
|
0.*4
|
g/*0min
|
|
Density
|
0.**9
|
g/cm3
|
|
Power Ash
|
0.*1
|
%
|
|
Tensile Strength
|
*2
|
Mpa
|
|
Elongation At Break
|
**0
|
%
|
|
Environmental stress-cracking
|
****0
|
-
|
|
Packing
|
*5kg in pp bag, *0MT/1X*0'FCL
|
|
|
Tests
|
Value
|
Unit
|
|
Melt Flow Rate (MFR)
|
*5
|
g/*0min
|
|
Density
|
0.**2
|
g/cm3
|
|
Tensile Yield Strength
|
7
|
Mpa
|
|
Elongation at Break
|
*5
|
%
|
|
Wien Softening Point
|
*5
|
?
|
|
Packing
|
In *5 kg PP woven bags, *0MT/*0’FCL
|
|
|
Tests
|
Value
|
Unit
|
|
Melt Flow Rate (MFR)
|
2.0±0.4
|
g/*0min
|
|
Density
|
**0±2
|
Kg/cm3
|
|
Tensile Strengthat Yield
|
8
|
Mpa ≥
|
|
Tensile Strengthat Break
|
*2
|
Mpa ≥
|
|
haze
|
*5
|
%≤
|
|
Packing
|
In *5 kg PP woven bags, *0MT/*0’FCL
|
|
| Pays: | China |
| N ° de modèle: | LDPE (low density polyethylene) |
| Prix FOB: | 800 ~ 1600 / Ton ( Negotiable ) Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 800 per Ton |
| Commande minimale: | 10 Ton |
| Packaging Detail: | 25 kg/PP bag or as customers' request. |
| Heure de livraison: | Within 21days after accept the payment |
| Capacité de Fournir: | 200 Ton per Month |
| Payment Type: | Western Union, T/T |
| Groupe de produits : | Plasitc raw materials |
